Tensile strength | Mecmesin

Tensile testing is the most common method employed to determine the mechanical strength of an object. It involves the application of uniaxial force to measure the performance of a test specimen, up to the point of it yielding or breaking, whether sharply or gradually. In simple terms, it is pulling something apart in a straight line and seeing how it changes.

In cases where pulling in tension to reach ultimate failure is not required, the tensile strength of an object can often be characterised by its elongation and relaxation properties, as in elastomers and springs.

The sample under test may be a specimen of raw material or a processed manufactured product. The specimen is usually held between 2 tensile grips and load is applied at a constant rate by a tension/compression tester fitted with a loadcell. Data is collected and can be plotted on a graph showing the curve of force/extension or stress/strain.

Calculations are typically performed on the data with results presented most commonly as:

tensile strength - the ultimate strength of a material subjected to tensile loading, it is the maximum stress developed in a material during a tensile test
break strength - the load at which a break is detected, as defined by a drop in load. It may be different from tensile strength
yield strength - the maximum stress that can be applied to a material without causing plastic deformation, it is the stress at which a material exhibits permanent deformation and is a practical approximation of the elastic limit
Youngs modulus (modulus of elasticity) - the gradient of the stress vs strain graph where the relationship between stress and strain is linear

Tensile testing is an important part of the design for ensuring product safety and integrity, as well as being an essential part of quality-control testing for consistency in manufacture and assembly.

Some of our customers

Featured case studies

MultiTest 50-i cable suspension system tester in-situ

Tensile testing wire joining systems

Kulak halkası kayış gücü testini ve örnek giyen bir klinisyeni maske

Yüz maskesi dayanım testi

ASTM D412'ye çekme dayanımı testi başlıyor ve tamamlanıyor

Cerrahi lastik eldiven çekme dayanımı testi

Standards

Featured or equivalent test standards for Mecmesin solutions in this section

*corp Ford DSEU

Car door slam energy test

*corp M&S-P11

Tensile strength of woven fabrics

29 073-3

Textilien Prüfverfahren für Vliesstoffe Teil 3: Bestimmung der Höchstzugkraft und der Höchstzugkraftdehnung

ANSI/EIA 364-38B

Cable pull-out test procedure for electrical connectors

ASTM C1341

Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

ASTM C1368

Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature

ASTM C907

Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

ASTM D1414

Standard Test Methods for Rubber O-Rings

ASTM D143

Standard Test Methods for Small Clear Specimens of Timber

ASTM D1578

Standard Test Method for Breaking Strength of Yarn in Skein Form

ASTM D1683

Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics

ASTM D1708

Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

ASTM D1710

Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

ASTM D2061

Standard Test Methods for Strength Tests for Zippers

ASTM D2062

Standard Test Methods for Operability of Zippers

ASTM D2105

Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

ASTM D2256

Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method

ASTM D2343

Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

ASTM D2653

Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)

ASTM D3039 / D3039M

Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

ASTM D3354

Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

ASTM D349

Standard Test Methods for Laminated Round Rods Used for Electrical Insulation

ASTM D3577

Standard Specification for Rubber Surgical Gloves

ASTM D3578

Standard Specification for Rubber Examination Gloves

ASTM D378

Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type

ASTM D3807

Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)

ASTM D3822

Standard Test Method for Tensile Properties of Single Textile Fibers

ASTM D3826

Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

ASTM D3916

Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

ASTM D3950

Standard Specification for Strapping, Nonmetallic (and Joining Methods)

ASTM D412-16

Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers— Tension1

ASTM D4632-08

Standard Test Method for Grab Breaking Load and Elongation of Geotextiles

ASTM D4649-03

Standard Guide for Selection and Use of Stretch Wrap Films

ASTM D4766

Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure

ASTM D4776 / D4776M-18

Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure

ASTM D5034-09

Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

ASTM D5035-11

Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

ASTM D5083-17

Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

ASTM D5450/D5450M-11

Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

ASTM D5766 / D5766-M

Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

ASTM D6324-11

Standard Specification for Male Condoms Made from Polyurethane

ASTM D638-14

Standard Test Method for Tensile Properties of Plastics

ASTM D6693-04

Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

ASTM D6713-14

Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

ASTM D7269/D7269M-11

Standard Test Methods for Tensile Testing of Aramid Yarns

ASTM D751-06

Standard Test Methods for Coated Fabrics

ASTM D76-99

Standard Specification for Tensile Testing Machines for Textiles

ASTM D876 - 13

Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

ASTM D885/D885M-10a

Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers

ASTM D953-18

Standard Test Method for Pin-Bearing Strength of Plastics

ASTM E1012-12e1

Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

ASTM E345-93

Standard Test Methods of Tension Testing of Metallic Foil

ASTM E8/E8M-13a

Standard Test Methods for Tension Testing of Metallic Materials

ASTM F152-95

Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

ASTM F2018

Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

ASTM F458-13

Standard Practice for Nondestructive Pull Testing of Wire Bonds

BS 1726-2

Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing. Part 2, extension springs

BS 2782-12: 1210A to C

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties

BS 373

Methods of testing small clear specimens of timber

BS 6319-7

Testing of resin and polymer/cement compositions for use in construction. Method for measurement of tensile strength

BS 7907

Code of practice for the design and manufacture of childrens clothing to promote mechanical safety

BS EN 12209

Building hardware. Locks and latches. Mechanically operated locks, latches and locking plates. Requirements and test methods

BS EN 12311-1

Flexible sheets for waterproofing. Determination of tensile properties. Bitumen sheets for roof waterproofing

BS EN 12311-2

Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing

BS EN 12562

Textiles. Para-amid multifilament yarns. Test methods

BS EN 1263-1

Safety nets Safety requirements, test methods

BS EN 12655

Gymnastic equipment. Hanging rings. Functional and safety requirements, test methods

BS EN 12697-23

Bituminous mixtures. Test methods. Determination of the indirect tensile strength of bituminous specimens

BS EN 12814-2

Testing of welded joints of thermoplastics semi-finished products. Tensile test

BS EN 12814-6

Testing of welded joints of thermoplastics semi-finished products. Low temperature tensile test

BS EN 12814-7

Testing of welded joints of thermoplastics semi-finished products. Tensile test with waisted test specimens

BS EN 1393

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties

BS EN 1394

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent initial circumferential tensile strength

BS EN 14350-1

Child use and care articles. Drinking equipment. General and mechanical requirements and tests

BS EN 14372

Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests

BS EN 1607

Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces

BS EN 1608

Thermal insulating products for building applications. Determination of tensile strength parallel to faces

BS EN 16732

Slide fasteners (zips). Specification

BS EN 2307

Fibre ropes. Determination of certain physical and mechanical properties

BS EN 2591-417

Aerospace series. Elements of electrical and optical connection. Test methods. Tensile strength (crimped connection)

BS EN 2591-709

Aerospace series. Elements of electrical and optical connection. Test methods. Electrical elements. Tensile strength of couplers

BS EN 2597

Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction

BS EN 2747

Glass fibre reinforced plastics. Tensile test

BS EN 29073-3

Methods of test for nonwovens. Determination of tensile strength and elongation

BS EN 319

Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board

BS EN 3475-505

Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands

BS EN 50289-3-16

Communication cables. Specifications for test methods. Mechanical test methods. Cable tensile performance

BS EN 50289-3-2

Communication cables. Specifications for test methods. Mechanical test methods. Tensile strength and elongation for conductor

BS EN 50289-3-4

Communication cables. Specifications for test methods. Mechanical test methods. Tensile strength, elongation and shrinkage of insulation and sheath

BS EN 564

Mountaineering equipment. Accessory cord. Safety requirements and test methods

BS EN 565

Mountaineering equipment. Tape. Safety requirements and test methods

BS EN 60793-1-31

Optical fibres. Measurement methods and test procedures. Tensile strength

BS EN 61067-2

Glass and polyester fibre woven tapes. Method of test

BS EN 61300-2-4

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-4: Tests - Fibre/cable retention

BS EN 61300-2-6

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-6: Tests - Tensile strength of coupling mechanism

BS EN 62275

Cable management systems. Cable ties for electrical installations

BS EN ISO 10319

Geosynthetics. Wide-width tensile tests

BS EN ISO 10555-5

Intravascular catheters. Sterile and single-use catheters. Over-needle peripheral catheters

BS EN ISO 10618

Carbon fibre. Determination of tensile properties of resin-impregnated yarn

BS EN ISO 12230

Surfaces for sports areas. Determination of tensile properties of synthetic sports surfaces

BS EN ISO 12625-12

Tissue paper and tissue products -- Part 12: Determination of tensile strength of perforated lines -- Calculation of perforation efficiency

BS EN ISO 13002

Carbon fibre. Designation system for filament yarns

BS EN ISO 13262

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam

BS EN ISO 13934-1

Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method

BS EN ISO 13934-2

Textiles. Tensile properties of fabrics. Determination of maximum force using the grab method

BS EN ISO 1421

Rubber- or plastics-coated fabrics. Determination of tensile strength and elongation at break

BS EN ISO 1806

Fishing nets. Determination of mesh breaking force of netting

BS EN ISO 2062

Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester

BS EN ISO 4074

Natural latex rubber condoms. Requirements and test methods

BS EN ISO 527-1

Plastics. Determination of tensile properties. General principles

BS EN ISO 527-2

Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics

BS EN ISO 6259-1

Thermoplastics pipes. Determination of tensile properties. General test method

BS EN ISO 6892-1

Metallic materials. Tensile testing. Part 1: Method of test at room temperature

BS EN ISO 6892-2

Metallic materials – Tensile testing. Part 2: Method of test at elevated temperature (ISO 6892-2:2018)

BS EN ISO 8670-2

Ostomy collection bags. Requirements and test methods

BS EN ISO 9163

Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings

BS ISO 5893

Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

BS ISO 6939

Textiles - Yarns from packages - Method of test for breaking strength of yarn by the skein method

BS ISO 7322

Composition cork. Test methods

DIN 3419-1

Slide fasteners - Part 1: Technical delivery conditions

DIN EN 10002-1

Tensile testing of metallic materials. Method of test at ambient temperature

EN 149

Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking

FEFCO 4-6,8,11,50,55

Introduction to the development of FEFCO Testing Methods for corrugated board and boxes

IEC 60371-2

specification for insulating materials based on mica - part 2 methods of test

IEC 61196-1-308

Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals

IEC 61210

Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements

ISBT PTC-00004

Sports Closures Voluntary Standard Performance Specifications and Test Methods

ISO 11070

Sterile single-use intravascular introducers, dilators and guidewires

ISO 12625-4

Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption

ISO 12625-5

Tissue paper and tissue products - Part 5: Determination of wet tensile strength

ISO 1421

Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break

ISO 1798

Flexible cellular polymeric materials -- Determination of tensile strength and elongation at break

ISO 1805

Fishing nets — Determination of breaking force and knot breaking force of netting yarns

ISO 1924-1

paper and board - determination of tensile properties - Part 1: constant rate of loading method

ISO 1926

Rigid cellular plastics -- Determination of tensile properties

ISO 21180

Light conveyor belts -- Determination of the maximum tensile strength

ISO 283

Textile conveyor belts -- Full thickness tensile strength, elongation at break and elongation at the reference load -- Test method

ISO 37

Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties

ISO 3781

Paper and board -- Determination of tensile strength after immersion in water

ISO 5079

Textile fibres -- Determination of breaking force and elongation at break of individual fibres

ISO 527-3

Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets

ISO 527-4

Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

ISO 527-5

Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

ISO 7622-2

Steel cord conveyor belts -- Longitudinal traction test -- Part 2: Measurement of tensile strength

ISO 9073-18

Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test

ISO 9073-3

Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation

JIS S3015

Methods for Measuring Zipper Dimensions Standard Test Methods for Strength

MIL S-23190E

Military specification: straps, clamps, and mounting hardware, plastic and metal for cable harness tying and support

NF S86-604

Horology - Characterization of metallic bracelets for watches

NF S86-606

Watch industry. Test methods for leather and non-metallic bracelets

SAE USCAR-38

Performance Specification for Ultrasonically Welded Wire/Cable Termination

TAPPI T 1009

Tensile strength and elongation at break for fiber glass mats

TAPPI T 456

Wet tensile breaking strength of paper and paperboard

TAPPI T 541

Internal bond strength of paperboard (z-direction tensile)

TAPPI T 576

Tensile properties of towel and tissue products (using constant rate of elongation apparatus)

TAPPI T 821

Pin adhesion of corrugated board by selective separation

ASTM C297

Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

ASTM C393

Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

ASTM D3217

Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations

ASTM D6862-11

Standard Test Method for 90 Degree Peel Resistance of Adhesives

ASTM F2923

Standard Specification for Consumer Product Safety for Children’s Jewelry

ASTM F2999

Standard Consumer Safety Specification for Adult Jewelry

BS EN 12090

Thermal insulating products for building applications. Determination of shear behaviour

BS EN 12430

Thermal insulating products for building applications. Determination of behaviour under point load

BS EN 60352-2

Solderless connections. Crimped connections. General requirements, test methods and practical guidance

BS EN 71-1

Safety of toys. Part 1: Mechanical and physical properties

BS EN ISO 3376

Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension

EN 12089

Thermal insulating products for building applications. Determination of bending behaviour

EN 826

Thermal insulating products for building applications - determination of compression behaviour

ISO 23910

Leather - Physical and mechanical tests -Measurement of stitch tear resistance

ISO 3377-2

Leather -- Physical and mechanical tests -- Determination of tear load -- Part 2: Double edge tear

ISO 374-4

Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals

ISO 6425

Horology - Divers' watches

SAE AS7928

Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification for

Twin-column high capacity UTM with software control

Case study

Automotive chain drive components tension and compression testing

Student observes a three-point bend test of an Oreo, part of an in-class laboratory in their Introduction to Materials Science course. Real-time results from the MultiTest are projected in the classroom.

Case study

Worcester Polytechnic Institute (WPI) finds Materials Science's sweet spot

Calibrated, measured load graphing visually indicates the sample’s performance as it is stretched

Case study

Fishing line and knot strength

MultiTest 50-i cable suspension system tester in-situ

Case study

Tensile testing wire joining systems

ISO13934-1 Strip method and ASTMD3217 Breaking tenacity loop method

Case study

Extreme sports waterproof bio-textile mechanical properties

Kasnak sistemi ile büyük solenoid gerilim testi

Case study

Solenoid kuvvet testi

Kulak halkası kayış gücü testini ve örnek giyen bir klinisyeni maske

Case study

Yüz maskesi dayanım testi

ASTM D412'ye çekme dayanımı testi başlıyor ve tamamlanıyor

Case study

Cerrahi lastik eldiven çekme dayanımı testi

EN311 ve EN319 Sunta yüzey sağlamlığı ve mukavemet testleri

Case study

Kendinden montajlı ve hazır mobilyalarda kullanılan tahtaların çekme testi

Deri numune örneği çekme dayanımı ve uzama test cihazları

Case study

Deri ISO Mukavemet, Uzama ve Yırtılma Direnci Yöntemleri Testi

Polis İş İlişkileri Uygunluk Testi temsilcisi başarılı / başarısız çaba kalibrasyonu

Case study

Polis elle taşıma ve koruyucu giysileri zorlar

Mücevher zinciri ve çocuk bileziğinin çekme dayanımı testi

Case study

Güvenlik ve dayanıklılık için çekme mukavemeti standartlarına göre mücevher testi

Baba tutamakları ile ISO 1806'ya göre balık ağı çekme mukavemeti testi

Case study

Balıkçılık ağı ISO1806'ya göre çekme dayanımı testi

Özel fikstürlerle çanta dönen toka tork testi

Case study

Çanta tokaları ve diğer bagaj bileşenleri

Saat kayışı yay çubuğu ve deri halka gerilme mukavemeti testleri

Case study

Saat bileşenlerinin ve eklerinin kuvvet testi

Mineral yün panel soyma testi ve çekme dayanımı test örneği

Case study

Mineral yün yalıtım paneli testi

Enjektör luer konektör çekme gücü [PDV10032]

Custom-fit

Cam şırınga Luer kilit eki çekme

Elektriksel filament dışarı çekme testi PDV13150

Custom-fit

Elektrikli montaj bileşen gücü

Emme fikstürü karton katlama testi, tamamen açık pozisyon [PDV8017]

Custom-fit

Karton içecek şişe taşıyıcı açılımı

Tıbbi tüpün çekilmesi [PDV14004]

Custom-fit

Şırınga tüpü çekme testi

Tıbbi cihazdan çekme testi filtrasyon sayfası

Custom-fit

Sıralı solunum filtresi çekme testi

Kaynak kopması test sistemi MDD ve AFG gösterge ekranı PDV9037

Custom-fit

Enjeksiyon kalıplı montaj bütünlüğü

Eklenmiş kaynaklı telin çekme testi için kablo kam tutamakları [PDV12086]

Custom-fit

Uygun maliyetli kablo gücü testi

Kozmetik fırçasının dışarı çekilmesi [PDV14098]

Custom-fit

Kozmetik fırça çekme testi

Emniyet kemeri mekanizması test yakın yerinde

Case study

Emniyet kemeri kilitleme cihazı testi

Dokunmamış bant tekstil test çözümleri

Case study

Su engelleme bandının soyulma mukavemeti ve uzama testi

Evde tasarlanmış tıbbi enjektör test fikstürleri

Case study

Kalem enjektör eğitim yardım testi

Yerinde astım tıbbi cihaz yay testi

Case study

Solunum cihazı yay testi

UltraTest sisteminde gıda plastik filmi çekme testi

Case study

Plastik film gerginlik testi

Plastik kalıplı konveyör komponent çekme testi

Case study

Plastik bağlantı bileşeni çekme dayanımı testi

Hayvan kimlik etiketi testi ve örnekleri

Case study

Hayvan kimlik etiketleri mukavemet ve sökme testi

Üretim tesisinde akü terminali çekme çekme testi

Case study

Akü terminali kaynak bütünlüğü çekme testi

Kabin kapısı kapanma çabası testi komple çözüm

Case study

Araba kapısı kapatma çabası

Ekranda grafiksel çıktı ile üreticide polietilen film çekme mukavemeti testi

Case study

Polietilen film üzerinde çekme deneyi

Kauçuk ve plastik sızdırmazlık bileşenleri ve malzemelerinin köpek kemiği örneklerinin gerilim testi altında uzama

Case study

Kauçuk contalarda çekme testi

Pnömatik tutma yerleri ile cerrahi kılavuz kopma mukavemeti testi

Case study

Tıbbi kılavuz tel kopma mukavemeti testi

Birden fazla tıbbi cihaz testi için yük kafesi fikstürü

Case study

Tıbbi cihazların testi

Vakum fikstürlü tam sistemli düz ambalaj kartonu

Case study

Yapıştırılmış karton ambalaj bütünlüğü

Mobilya dokuma döngüsel sıkıştırma testi

Case study

Mobilya dokuma çekme dayanımı testi

Dış şenlikli aydınlatma ankraj sabitleme ve dışarı çekme test yöntemi

Case study

Şenlikli aydınlatma duvar ankraj gücü kontrolü

Kriket bilyalı çekirdek sıkıştırma test sistemi

Case study

Kriket topu basınç deformasyon gücü ve kapak malzemesi çekme dayanımı

Sahada güvenlik ağı dayanım testi

Case study

İnşaat güvenlik ağı sertifikasyon testi

Solenoidlerin strok kuvvetini ölçmek için yatay olarak yönlendirilmiş test standı

Case study

Solenoid testi

Omuz eklem protezi test fikstür yakın çekim montaj

Case study

Omuz protezleri çekme testi

İskele güvenlik ağı testi

Case study

İskele destek ağ test cihazı

Müşteri yerinde ve örnek numune ürününde hava yastığı konektörü çekme testi

Case study

Araç hava yastıklarında güvenlik açısından kritik kaynaklar

İğneden lanset çekme testinde özel bir üst fikstür ve bir kama sapı kullanıldı

Case study

İğneden yüksük çekme testi

Motorlu bir çekme test cihazı üzerinde balon kumaş yırtma ve perçin çekme testleri

Case study

Sıcak hava balonu bezi çekme mukavemeti ve yırtılma direnci testi

Dağıtım kapağının yer değiştirmesini yüklemek ve ölçmek için özel fikstür

Case study

İnhaler kapağının uç şamandıra testi

Montaj klipsi testinin çekme kuvveti

Case study

Metal panjur hammaddesinin çekme mukavemeti için test edilmesi

Yay örnekleri-ve-AFG-kanca sıkıştırma levhası

Case study

Yay tasarımı ve üretimi

Örümcek ve ipek iplik gerilmesi

Case study

Örümcek İpek Çekme Mukavemeti ve Tokluğu

Spor içki kap çekme testi yakın çekim

Case study

ISBT spor kapatma gerginlik testi

Further test types

elongation and recovery

grab method (fabrics)

strip method (fabrics)