Materials | Mecmesin

Some of our customers

Featured case studies

A contact extensometer was used with enough axial travel to accommodate the amount of strain of the test pieces

Testing rubber to materials standards

Single catalytic pellet on a coin and compression tester with self-levelling plates

Crush strength testing of catalyst pellets

Ventilator components tensile tests pipes tubes and connectors

Testing ventilator and breathing assistance apparatus components

Standards

Featured or equivalent test standards for Mecmesin solutions in this section

ASTM C297

Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

ASTM C393

Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

ASTM D3217

Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations

ASTM D3577

Standard Specification for Rubber Surgical Gloves

ASTM D3578

Standard Specification for Rubber Examination Gloves

ASTM D3822

Standard Test Method for Tensile Properties of Single Textile Fibers

ASTM D412-16

Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers— Tension1

ASTM D4179

Standard Test Method for Single Pellet Crush Strength of Formed Catalyst Shapes

ASTM D4280-03

Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

ASTM D6175-03

Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles1

ASTM D6862-11

Standard Test Method for 90 Degree Peel Resistance of Adhesives

ASTM D7084-04

Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers1

ASTM F2923

Standard Specification for Consumer Product Safety for Children’s Jewelry

ASTM F2999

Standard Consumer Safety Specification for Adult Jewelry

BS 5229

Method for determination of tuft withdrawal force of carpets

BS EN 12090

Thermal insulating products for building applications. Determination of shear behaviour

BS EN 12430

Thermal insulating products for building applications. Determination of behaviour under point load

BS EN 12467

Fibre-cement flat sheets. Product specification and test methods

BS EN 1263-1

Safety nets Safety requirements, test methods

BS EN 1263-1

Safety nets Safety requirements, test methods

BS EN 1607

Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces

BS EN 1608

Thermal insulating products for building applications. Determination of tensile strength parallel to faces

BS EN 310

Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

BS EN 310

Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

BS EN 319

Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board

BS EN 520

Gypsum plasterboards. Definitions, requirements and test methods

BS EN 71-1

Safety of toys. Part 1: Mechanical and physical properties

BS EN ISO 13934-1

Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method

BS EN ISO 1806

Fishing nets. Determination of mesh breaking force of netting

BS EN ISO 1806

Fishing nets. Determination of mesh breaking force of netting

BS EN ISO 2062

Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester

BS EN ISO 314-1

Plywood. Bonding quality. Part 1: Test methods

BS EN ISO 3376

Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension

EN 12089

Thermal insulating products for building applications. Determination of bending behaviour

EN 826

Thermal insulating products for building applications - determination of compression behaviour

ISO 1805

Fishing nets — Determination of breaking force and knot breaking force of netting yarns

ISO 23910

Leather - Physical and mechanical tests -Measurement of stitch tear resistance

ISO 3377-2

Leather -- Physical and mechanical tests -- Determination of tear load -- Part 2: Double edge tear

ISO 374-4

Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals

ISO 8510-1

Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90 degree peel

A contact extensometer was used with enough axial travel to accommodate the amount of strain of the test pieces

Case study

Testing rubber to materials standards

Single catalytic pellet on a coin and compression tester with self-levelling plates

Case study

Crush strength testing of catalyst pellets

Ventilator components tensile tests pipes tubes and connectors

Case study

Testing ventilator and breathing assistance apparatus components

Puncture resistance test of protective glove material specimen to ISO 374

Case study

Surgical rubber glove tensile strength testing

Leather sample specimen elongation test equipment to ISO 3376 with graphical results

Case study

Leather ISO Testing to Strength, Elongation and Tear Resistance Methods

MultiTest in the stress lab Imperial college London

Case study

Tension and compression testing for education in solid mechanics

Elongation under tension testing of rubber sealing component material dogbone specimen

Case study

Tensile test on rubber gaskets

Further test types

Construction materials

Cord, rope and netting

Fabrics, textiles and yarns

Furniture and soft furnishings