Search results
526
Event
Medical Device Testing: Torque testing of Child Resistant Closures (CRC) with 21 CFR Part 11 compliance
Torque testing of Child Resistant Closures (CRC) with 21 CFR Part 11 compliance
527
Accessory
Automated Syringe Batch Tester
PDV19179
The Automated Syringe Batch tester is a bench-top system for checking the ‘break-loose’ and ‘glide force’ of up to 12 individual syringes in one ‘load-and-run’ cycle. In the face of increased demand on production of syringes, this system enables larger…
528
Accessory
Crush Test Fixture with Precision Guide
PSV21062
Precise alignment of the upper compression plate with the test piece is essential for optimum accuracy of results. Mecmesin recommends a minimum of self-adjusting compression plates and, for ECT and RCT tests, the Crush Test Fixture featuring a Precision…
529
Accessory
Horizontal feet kit for 2.5 kN single-column test stand (on side)
PDV11065
Feet kit for the horizontal operation of a MultiTest motorised test.
When fitted the front panel of the test stand will be on its side for ease-of-operation by the user.
530
Accessory
Digital Height Scale and Brackets for LCP/S Test Stand
432-162 V01
Digital Height Scale and Brackets for mounting to the lever-operated Manual Test Stand model LCP/S.
The digital display of the height-scale is fixed to the moving crosshead of the test stand so that it's displacement can be monitored. This is often…
531
Accessory
Interface cable, AFG/AFTI to MultiTest-dV / Vortex-dV, Stand reverse & RS232
351-092
Interface cable, AFG to MultiTest-dV (2003-April 2020)…
532
Accessory
Puncture Test Fixture to EN ISO 14477, 500N, QC-20 fitting
MecS511
This EN ISO 14477 Puncture Test Fixture is for testing resistance strength in flexible packaging materials.
The specimen is clamped in the lower specimen holder, which is connected to the base plate of the test stand via a QC-20 female hole.
An upper '…
533
Accessory
Set of 4 fixing pegs for torque testers - 35 mm high
432-447
Set of standard 35mm high gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower Torque Fixing Tables…
534
Accessory
Protective Dust Cover for fitting to MultiTest 2.5-xt stand (500 mm) and console
432-484
The covers offer protection to MultiTest 2.5-xt motorised test stands in dusty and dirty environments.
They are durable and easy to clean, and feature quick-acting velcro fastening strips for simple fitting and removal.
Dust covers are available for…
535
Accessory
Protective Dust Cover for fitting to MultiTest 2.5-i stand (500 mm)
432-483
The covers offer protection to MultiTest 2.5-i motorised test stands in dusty and dirty environments.
They are durable and easy to clean, and feature quick-acting velcro fastening strips for simple fitting and removal.
Dust covers are available for…
536
Accessory
Horizontal feet kit for 2.5 kN single-column test stand (on side)
PDV11065
Feet kit for the horizontal operation of a MultiTest motorised test.
When fitted the front panel of the test stand will be on its side for ease-of-operation by the user.
537
Test Frame
MultiTest-dV test frame
MultiTest-dV test frame
A ballscrew-driven motorised test frame designed to apply tension and compression from 2 N right up to a capacity of 2.5 kN (550 lbf).Its versatile construction makes it perfectly suited for testing all kinds of components in a…
538
Accessory
Puncture Test Fixture to EN ISO 14477, 500N, QC-20 fitting
MecS511
This EN ISO 14477 Puncture Test Fixture is for testing resistance strength in flexible packaging materials.
The specimen is clamped in the lower specimen holder, which is connected to the base plate of the test stand via a QC-20 female hole.
An upper '…
539
Accessory
Cable tie break fixture for CrimpTest-1 kN
432-653
Cable-tie Break Fixture for CrimpTest-1
The Cable-tie Break Fixture comprises 2 split halves each having semi-circular stepped bollards for testing the tensile strength of cable-ties. There are 3 steps of 10 mm height steps to accommodate various length…
540
Test Frame
MultiTest-dV test çerçevesi
MultiTest-dV test çerçevesi 2 N'den 2,5 kN (550 lbf) kapasiteye kadar gerilim ve sıkıştırma uygulamak için tasarlanmış vidalı mil tahrikli motorlu test çerçevesi. Çok yönlü yapısı, kalite kontrol veya Ar-Ge ortamında her türlü bileşeni test etmek…
541
Case study
PPE yüz siperliklerinde köpük bandın soyulma mukavemeti
gereklilik Yüz Kalkanları (Yüz Vizörleri olarak da bilinir), COVID-19'un yayılmasını önlemeye yardımcı olmak için sağlık sektöründeki ön saflarda çalışanlar tarafından kullanılan hayati bir KKD aracıdır.
542
Case study
Ölçülü inhalerler, otomatik enjektörler ve insülin kalemleri için dozaj kontrol tork testleri
gereklilik En iyi hasta iyileşme ve refah şansını sağlamak için doğru uygulama ve uygun ilaç dozunun temel olduğunu söylemeye gerek yoktur.
544
Case study
Tea bag integrity
Customised engineering example
Some of the simplest applications may not seem so obvious when you face them. A string and tab on a tea bag?
545
Case study
Sports shoe cleats release torque
Requirement
A leading golf shoe supplier needed to measure the release torque of the interchangeable cleats in its range of sports footwear.
546
Case study
Endüstriyel sıvı kabı dağıtım kapağı uygulama ve çıkarma kuvveti
gereklilik Yeni bir yağ kabı tasarımından enjeksiyon kalıplı bir kapağın itme kuvvetini ve çıkarma kuvvetini ölçmek için bir sistem gerekliydi.
547
Accessory
Assisted Pull-Peel Table 90 Degree, 500 N
432-051
The Assisted Pull-Peel table is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of the peel table is directly…
548
[Page extract]
Industry
Mecmesin is an expert in the design and manufacture of force, materials and torque testing equipment, with over 40 years’ dedicated experience in the field.
549
Accessory
Sequin Pull-off Fixture, 50 N
432-291
The sample fabric is typically held in a separate 'grab test' textile fixture (432-323) mounted to the anvil plate. The sequin or other small appliqué is then clamped in the serrated jaw of a pair of 'Kelly' clamping forceps. This is then placed over a…
550
Accessory
3- & 4-point Bend Jig, 50 kN, Steel, QC-32 fitting
Mec103-cgr
MEC103 - A compact yet fully-configurable 50 kN Bend Jig in steel.
The main support beam attaches to the base of the test frame and has a bending span up to 120 mm. It can accept a wide selection of interchangeable single-roller or dual-roller anvils to…