Mecmesin | Search results

1901

^{[Page extract]}

IEC 60598

IEC 60598-1 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V.

1902

^{[Page extract]}

Specifies a method for measuring the tensile strength, strain at break and tensile energy absorption of paper and board, using a testing machine operating at a constant rate of elongation (20 mm/min).

1903

^{[Page extract]}

BS EN 13942

This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for t

1904

^{[Page extract]}

BS EN 13411-3

This European Standard deals with the requirements for ferrules for the ferrule-securing of eyes and endless loops - it applies to slings and assemblies using steel wire ropes for general lifting applications up to and including 60mm diameter conforming

1905

^{[Page extract]}

Vice grip (Pneumatic)

Vice grips (single-action) - having one fixed jaw against which a second parallel jaw is tightened. The position of the fixed face may be adjustable to accommodate differing specimen thickness.

1906

Article/Campaign

Test title

Top-load testing solutions

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce ac ipsum varius, porttitor enim eu, porta ipsum. Quisque fermentum dolor est, in interdum purus tincidunt vitae.

1907

^{[Page extract]}

CETIE Guide 7

This guideline applies to the screw capping of still wines with a metallic closure having a threaded plastic insert and a tamper-evident band which needs to be snapped before it can be opened. The closure is screwed and crimped during capping.

1908

^{[Page extract]}

*corp 01M-01-217

To determine the maximum force required to rupture (break) a woven fabric.

1909

^{[Page extract]}

BS EN ISO 4074

BS EN ISO 4074:2002 specifies the minimum requirements and the test methods to be used for condoms made from natural rubber latex which are supplied to consumers for contraceptive purposes and to assist in the prevention of sexually transmitted infectio

1910

^{[Page extract]}

ASTM D6243-09

This test method covers a procedure for determining the internal shear resistance of a Geosynthetic Clay Liner (GCL) or the interface shear resistance between the GCL and an adjacent material under a constant rate of displacement or constant stress.

1911

^{[Page extract]}

IEC 61210

IEC 61210:2010 applies to non-insulated flat quick-connect terminations consisting of a male tab of size 2,8 mm, 4,8 mm, 6,3 mm or 9,5 mm with hole or dimple detents and a mating female connector for use as either an incorporated or an integrated part o

1912

^{[Page extract]}

ISO 4049

This document specifies requirements for dental polymer-based restorative materials supplied in a form suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation, and intended for use primarily for the direct or

1913

^{[Page extract]}

ASTM E2658-15

These practices cover procedures and requirements for the calibration and verification of testing machine speed by means of standards calibration devices

1914

Specials

Vector instruments - Intuitive touchscreens

Intuitive touchscreen The most advanced touchscreen force and torque gauges, powered by Vector OS. Handheld instruments built for tough environments to deliver accuracy and reliability.

1915

^{[Page extract]}

ISO 9727-4

ISO 9727-4 specifies a test method for determining the percentage of diameter recovery of cylindrical cork stoppers, after compression.

1916

^{[Page extract]}

USP <381>

This chapter applies to closures used for long-term storage of preparations defined in the general test chapter Packaging and Storage Requirements á659ñ, Injection Packaging.

1917

^{[Page extract]}

ASTM D4475-02

ASTM D4475 is a test method used for determining the horizontal shear strength of fiber reinforced plastic rods.

1918

^{[Page extract]}

ASTM F543-13

This specification provides requirements for materials, finish and marking, care and handling, and the acceptable dimensions and tolerances for metallic bone screws that are implanted into bone.

1919

^{[Page extract]}

ASTM D3470

This test method covers the determination of the force required to cause a downward-force-while-turning lug-finish closure to be rotated across the container finish lugs (strippage) without downward force being applied to the closure (Type IIA closures)

1920

^{[Page extract]}

ASTM D6324-11

ASTM D6324 covers the minimum requirements for individually packaged male condoms made from polyurethane. This specification also describes the minimum inspection and quality levels that shall be utilized in referee tests.

1921

^{[Page extract]}

ASTM D413-98

ASTM D413 is a test method used to determine the force per unit width required to separate a rubber layer from a flexible substrate such as fabric, wire or sheet metal.

1922

^{[Page extract]}

ASTM C403/C403M

This test method covers the determination of the time of setting of concrete, with slump greater than zero, by means of penetration resistance measurements on mortar sieved from the concrete mixture.

1923

^{[Page extract]}

ISO 13954

ISO 13954 describes a peel test method for determining the decohesive resistance of polyethylene electrofusion socket assemblies for use in the distribution of fluids.

1924

^{[Page extract]}

ASTM D5083-17

ASTM D5083 is a test method for measuring the force required to break a reinforced thermoset plastic specimen and the extent to which the specimen stretches or elongates to that breaking point.

1925

^{[Page extract]}

ISO 283

ISO 283 specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor belts having a textile carcass.