Part Number
432-413
Description
The Floating Peel Jig is used to test the peel strength between adhesive layers of flat, rigid samples such as credit cards.
A portion of the top layer is placed between the rollers and held in an upper grip (order separately). As load is applied the specimen moves smoothly under the rollers while delamination tests up to 500 N are carried out at a constant 90 degree angle. Meets the requirements of international test standards (eg. ISO 10373-1).
Supplied fitted to a modified anvil plate for mounting to the base of a motorised test stand.
A portion of the top layer is placed between the rollers and held in an upper grip (order separately). As load is applied the specimen moves smoothly under the rollers while delamination tests up to 500 N are carried out at a constant 90 degree angle. Meets the requirements of international test standards (eg. ISO 10373-1).
Supplied fitted to a modified anvil plate for mounting to the base of a motorised test stand.
Images
Datasheet
Floating Peel Jig
Related Parts
Load Rating
500 N
( 110 lbf )
Fittings
Diagram
432-413 Floating Peel Jig
Speak to an expert
Got a question about this accessory? Get in touch and speak to one of our Technical Sales Engineers now...