Search results
876
Accessory
U-Form Vice Grip - Double Action, 5 kN, 106 mm opening , QC-20 fitting
Mec240g-S100
MEC 240g-S100 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the…
877
Accessory
Webbing Grip, 2 kN, QC-20 fitting
432-269
Webbing Grips are designed for tensile testing of high strength belts and tapes below 2 kN.
The sample is wound around the knurled roller and then around the smooth roller. As load is applied, the smooth roller moves in the slot to secure tightly…
878
Accessory
Square Perforated Aluminium Compression Plate, 150 x 150 mm, QC-20 or QC-32 fitting
Mec36L-150-L6x20
MEC36L-150-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 150mm x 150mm
Fitted with QC-20mm or 32mm…
879
Accessory
3-Point Bend Jig, 20 kN, Steel, QC-20 fitting
432-266
A simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (QC 20mm female connection) and two adjustable lower anvils also of 5mm radius.
Lower support beam is fitted with QC 20mm female connection suitable for mounting on single- and…
880
Accessory
Upper Torque Fixing Table for Vortex stands
432-321
Upper Torque Fixing Table.
Offers highly versatile holding of specimens when torque testing. Fully adjustable between 10 - 78mm opening to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as standard which screw into…
881
Accessory
Lightweight Pneumatic Plane Grip, Single-action, 200 N, pair, QC-20 fitting
Mec94
A pair of versatile Lightweight Pneumatic Plane Grips especially suitable for holding a variety of materials where the tensile force may be low but the material is sensitive to damage or slippage when clamped.
The adjustable screw-driven rod allows…
882
Accessory
Cable Cam Grip (smooth), 1 kN, 10-32 UNF
432-404
Cable Cam Grip - smooth, small
Designed for holding insulated cables and wire. The specimen is secured by the cam, which self-tightens as load is applied and spreads the load evenly.
Smooth cams are preferable for materials where a serrated cam may bite…
883
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 70 mm, 5-16 UNC
432-350
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
884
Accessory
Large Double-action Vice Grip, 5 kN, QC-20 fitting
432-433
The Large Double-action Vice Grip provides free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
It has a Tommy-bar handle on one side for rapid…
885
Accessory
Mounting plate for QC-20 Male Post on 50 kN systems
432-622
Allows QC type C Adapter (20mm Male Post) to be fitted directly to the base of 50 kN test systems.
Used when QC-20 grips and fixtures are in long-term use on 50kN test stand.
Supplied with 6 screws of M6 thread.
886
Accessory
Co-efficient of Friction (COF) Sled for ASTM D1894 and ISO 8295, 200g (foam), FPT-H1
432-633
A neoprene-faced sled with magnetic grips, for testing coefficient of friction of paper samples to TAPPI T549. Supplied with rigid and extensible links.
For use on the FPT-H1 Friction Tester.
887
Accessory
V-jaw vice clamp, four jaws on screw-action adjuster, QC-20 fitting
432-678
432-678 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has four jaws, with two jaws being vertically spaced on either side. This provides increased stability by clamping at alternate heights on…
888
Accessory
U-form Pneumatic Vice Grip - Single Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+Ko
MEC 240g +kO (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 70 mm diameter pneumatic…
889
Accessory
3-Point Bend Jig, 2.5 kN, Aluminium, base plate
432-151
432-151 :- a simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (M6 female thread connection) and two adjustable lower anvils also of 5mm radius. Lower support beam is fitted to a base plate suitable for Mecmesin motorised test…
890
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 20 mm opening, pair, QC-20 fitting
Mec240k-S20+Ko
MEC 240k- S20+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-20mm depending on the jaw types selected. Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter pneumatic piston.
This…
891
Accessory
Lower Torque Fixing Table, Vortex stands
432-320
Lower Torque Fixing Table.
Offers highly versatile holding of containers and specimens when torque testing. Fully adjustable between 10 - 190 mm opening (diameter) to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as…
892
Accessory
Thin Wire Grip with carrier for inset jaws, 2.5 kN, QC-20 fitting
Mec9
MEC9 Thin Wire Grip
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the…
893
Accessory
Filament Grip, 250 N, 10-32 UNF
432-363
The Filament Grip is designed for tensile testing up to 250 N of delicate, flexible specimens such as threads and yarns, which may break easily when clamped.
The specimen is wrapped around a grooved 13mm diameter bollard and the free end is clamped…
894
Accessory
Wedge Grip (large), 5 kN, 5-16 UNC
432-398
The 5 kN Wedge Grip is ideal for tensile testing of flat and rigid materials, including plastics, rubber and light metals.
A spring-loaded lever ensures the serrated jaws (25mm wide x 32mm high) are easy to open for fast securing and release of samples…
895
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 50 mm, 10-32 UNF
432-349
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
896
Accessory
Large Torque Saddle Plate
432-424
Saddle plates provide a more stable base on which to mount awkwardly-shaped samples.
Can be used on the 6 N.m Orbis and 6 N.m…
897
Accessory
Lightweight Lower Chuck, for use on base of Helixa stand
432-509
Lightweight Lower Chuck for Helixa
A pin-chuck fitted with an adaptor for connection to the motor spindle of 'Helixa' motorised test stands.
Max.opening 3.2mm. Supplied with T-bar to allow easy opening and tightening
Used for holding components and…
898
Accessory
FPT Tear Vice-Grips (pair), 100 mm rubber jaws, QC-8
432-625
A Lightweight Double-action Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile and tear testing of both symmetrical and asymmetrical specimens.
Fitted with 100mm-wide, rubber-…
899
Accessory
U-Form Pneumatic Vice Grip - Double Action, 2.5 kN, 18 mm opening, pair, QC-20 fitting
Mec240g+2Ko
MEC 240g +2kO (body only) :
A pair of pneumatically-operated, Double-action U-form Vice Grips with an opening of 0-18mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 70 mm diameter pneumatic pistons, which allow…
900
Accessory
Multi-Jaw Grip, 500 N, M6
432-215
Used in tension tests the Multi-Jaw Grip is for holding round and irregularly shaped specimens by clamping on the outer surface or under a 'head'.
By turning the body of the grip the claw-type jaws can be opened and closed to get a secure grasp on a…