Top-load Testing of Plant-based PLA Material Bottles

Case study
Compressive loading of stacked PLA bottles to measure column strength against traditional materials using Excel tabulated output data
Compressive loading of stacked PLA bottles to measure column strength against traditional materials using Excel tabulated output data
Single plastic bottle under buckling loads with comparative VectorPro graphical results
Single plastic bottle under buckling loads with comparative VectorPro graphical results

Solution

  • Software-controlled compression tester
  • Vented compression plate

Benefits

  • Repeatable range of crush tests for direct comparison to traditional plastic bottle performance
  • Powerful graphical and data output options for in-depth analysis
The Mecmesin team was very flexible and easy to work with, showing a positive `can-do’ attitude for designing tests outside the normal scope of work. Through their advanced testing equipment, Mecmesin was able to accurately identify core performance differences between resins and provide an accurate measure of bottle strength metrics. As a result of the testing, we are able to appropriately select raw materials to suit each market, which allows us to accurately control packing, loading and supply of our products.

Sandy Nielson, Founding Director
BioPak

Requirement

BioPak Solutions in Roquefort-les-Pins, France, are leaders in the production of Polylactic Acid (PLA) bottles. The bottles are oil-free, contain no PET or Bisphenol A, and are made 100% from carbon-absorbing plants. Using plant-based raw materials (corn) rather than petrochemicals they are eco- and vegan-friendly, require less energy to produce, are toxin-free, and are fully biodegradable.

To better evaluate the physical properties of their range of PLA bottles used for mineral water, BioPak Solutions turned to Mecmesin for help in testing their containers’ Top-Load Strength. The objective behind the testing was to identify core performance differences between resins to reveal areas for product design improvement.

Solution

To make sure that the plastic bottle can withstand the forces encountered when the screw-cap is pushed down onto it after the filling process and later when it is stacked in the warehouse, an axial compressive strength test is performed.

This methodology involved a traditional ‘single-bottle’ crush test whereby an empty bottle is compressed at a set speed until it deforms and the maximum load is recorded. A further test method was developed to perform a ‘dual bottle stack’ test, which was instrumental in differentiating the crush and buckling strength characteristics of bottles with different resins.

The Mecmesin OmniTest 5, in conjunction with VectorPro MT software, was deployed to carry out the top-load test. The peak load results were presented in newtons and incorporated into a test report, compatible with MS Excel, to enable analysis of the comparative performance of these plant-based products against those made from traditional materials.

Test equipment

  • Software-controlled compression tester
  • Vented compression plate
Talk to your Mecmesin representative in your country for solutions, pricing and support
 

Tem uma pergunta sobre este sistema? Entre em contato e fale com um de nossos engenheiros técnicos de vendas agora ...

Fale com um especialista