Search results
1301
Accessory
QC Type J, lightweight adapter, Ø 20 mm M to 10-32 UNF F c/w pin
432-418
Quick-Change Male Post to Thread Adapter (lightweight)
Fixes directly to the 10-32 UNF screw in anvil plate of test stands or to the 10-32 UNF extension rod connected to loadcells…
1302
Accessory
3-Point Bend Jig, 1 kN, Aluminium, T-slot base
432-248
A lightweight 3-point Bend Jig with 60 mm high upper and lower anvils of 1.5mm radius. Has a support span up to 120 mm.
Ideal for most low-force bending and snapping applications.
For use with T-slot base plate (432-294) - sold separately - to fit…
1303
Accessory
Extended Dovetail Bracket (for AFG or BFG)
432-326
The extended dovetail bracket provides 70 mm of extra daylight when mounting AFG or BFG force gauges to test stands. Fixing screws included.
Note: maximum load 500N
1304
Accessory
Self-levelling Compression Plate Steel - 116 mm, 25 kN, QC-20 fitting
MecS223k-116
MecS223k - 116mm diameter Self-levelling Compression Plate:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The…
1305
Accessory
MDD scale bracket kit
432-160
Bracket Set only.
Used for mounting of a Mitutoyo ABS-type Digital Height Scale to the handwheel-operated Manual Test Stand model MDD.
Note: Height-scale not included
1306
Accessory
Adapter, 10 kN, M10 to M12, M to M
432-335
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1307
Accessory
3/8" Upper Chuck Assembly for use on Helixa sensors
432-615
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
1308
Accessory
Self-levelling Compression Plate Steel - 196 mm, 50 kN, QC-32 fitting
MecS223g-196
MecS223g - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1309
Accessory
Dual Footswitches (locking type) for pneumatic grips
Mec205-2
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec 205-2:
Locking dual footswitches open the jaws of the grip by pressing the foot pedal and remain…
1310
Accessory
Cable Cam Grip (large serrated), 5 kN, M10 or M12
432-108
Designed for holding insulated cables and wire. The sample is secured by the serrated cam, which self-tightens as load is applied and minimises the chance of sample slippage.
The grip body features a clearance hole and is supplied with an M10 and M12…
1311
Accessory
Lightweight Vice Grip - Double Action, 100 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 100 N in tension with an…
1312
Accessory
Adapter, 500N, 10-32 UNF to M6, F to F
432-417
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1313
Accessory
TS torque screwdriver chuck, 3/8"
432-233
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (10mm) opening and is connected to the ‘TS’ screwdriver via a square drive spindle. Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m
1314
Accessory
Self-levelling Compression Plate Steel - 196 mm, 50 kN, QC-32 fitting
MecS223g-196
MecS223g - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1315
Accessory
Adapter, 500N, M6 to M6, F to F
432-334
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1316
Accessory
sample holder for standard fixture table
432-244
Fits to the standard fixture table (432-243) and used for easy configuration and alignment of test fixtures. The small-sample holder has been designed to accommodate spherical or irregular samples. Three sizes of holding plate are supplied.
1317
Accessory
‘T’ slot Base Plate
432-294
‘T’ slot base plate (replaces the standard base plate on single-column motorised test stands).
For use with specialist fixtures such as 1kN 3-point Bend Jig (432-294)
Includes ‘T’ bolt fittings.
1318
Accessory
Cone Point - 12 mm diameter, 5 kN, 5-16 UNC
432-359
A Cone Point probe of Ø 12.7 mm with angle of 60°.
For compression testing of various components or materials up to 5 kN.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
1319
Accessory
3/8" Lower Chuck Assembly for use on Helixa motor spindle
432-614
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw.
Used to secure a variety of test specimens for torque applications.
1320
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).
1321
Accessory
Peel Grip for FPT-H1, 50 mm rubber-faced jaws, QC-8 fitting
432-654
This Peel Grip can be used in conjunction with the FPT-H1 90 degree peel fixture kit (part no. 432-620) or the FPT-H1 180 degree peel fixture kit (part no. 432-636). It is preferred over the standard hook fixture when the drawn part of the sample is non-…
1322
Accessory
Self-levelling Compression Plate Steel - 156 mm, 50 kN, QC-32 fitting
MecS223g-156
MecS223g - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1323
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
1324
Accessory
Self-levelling Compression Plate Steel - 96 mm, 25 kN, QC-20 fitting
MecS223k-96
MecS223k - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1325
Accessory
Needle Probe, stainless steel, 2 mm
432-087
The 2mm diameter needle probe is made from stainless steel and has an M3 female thread. It is designed for surface puncture and penetration tests.
Commonly used with extension rod M3 male to 10-32 UNF female ... part number 432-100