Mecmesin | Search results

976

^{[Page extract]}

PSTC 101

These methods cover the measurement of the peel adhesion of pressure sensitive tapes.

977

^{[Page extract]}

An important factor affecting the performance of many membrane roofing systems is their ability to resist static puncture loads. This test method provides a means for assessing static puncture resistance.

979

Event

Texture Testing for Bakery Applications

The primary goal for using instrumentation to measure texture is to capture an objective value to something that is typically evaluated very subjectively. Texture cannot be controlled unless it measured in a consistent and repeatable manner.

980

Event

Fundamentals of Torque Testing

If you have ever struggled to open your favorite bottle of water or jam or required help loosening the lug nuts on your car’s wheels, it is likely due to a case of over-torque.

981

^{[Page extract]}

ISO 5628

Specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods.

982

^{[Page extract]}

BS EN 12562

Synthetic fibres, Polyamide fibres, Aramide fibres, Textile products, Textile testing, Yarn, Filament yarns, Filaments, Filament (textile fibre), Yarn testing, Yarn linear density determination, Elongation at fracture, Elongation, Force measurement, Mec

983

^{[Page extract]}

ASTM D3032

These test methods detail the standard procedures for testing hookup wire insulations including all components of the insulation system used on single insulated conductors or an assembly of single insulated conductors such as a cable bundle and harness

984

^{[Page extract]}

BS ISO 11040-4

This part of ISO 11040 applies to — tubing-glass barrels (single-chamber design) for injection preparations, and — sterilized subassembled syringes ready for filling.

985

^{[Page extract]}

ASTM F2193-02

These specifications and test methods provide standard specifications that specify material, labeling, and handling requirements for components used in surgical fixation of the spinal skeletal system such as metallic spinal screws, spinal plates, and sp

986

Event

Fundamentals of Torque Testing

If you have ever struggled to open your favorite bottle of water or jam or required help loosening the lug nuts on your car’s wheels, it is likely due to a case of over-torque.

987

^{[Page extract]}

double cisaillement sur collage à recouvrement

Le test de cisaillement sur les collages à recouvrement est utilisé lorsqu'un lien adhésif joint des surfaces planes.

988

^{[Page extract]}

Flexure

Flexural or bend testing is used It is a way of determining how something will react when it is put under opposing forces across a span.to evaluate both the ductility and soundness of a material.

989

^{[Page extract]}

double lap shear

Lap shear testing is used where an adhesive bond joins flat surfaces. The required surfaces may be profiled, single, double or multiple, but standard test methods focus on a single joint.

990

^{[Page extract]}

Test de traction et de compression

Les tests de traction et de compression permettent de déterminer la réaction d'un élément lorsqu'il est soumis à une séquence de forces de poussée et de traction.

991

^{[Page extract]}

cisaillement joint adhésif

Le test de cisaillement de joint adhésif est utilisé lorsqu'un adhésif joint des surfaces planes. Les surfaces utilisées peuvent être profilées, simples, doubles ou multiples, mais les méthodes de test normalisé se concentrent sur un seul joint.

992

^{[Page extract]}

Insertion and withdrawal

Insertion and withdrawal testing involves applying and measuring the compressive force to an object to push it into a recepticle, then measuring the tension force to pull it out. This may be done for a single cycle or over multiple cycles.

993

^{[Page extract]}

single lap shear

Lap shear testing is used where an adhesive bond joins flat surfaces. The required surfaces may be profiled, single, double or multiple, but standard test methods focus on a single joint.

994

^{[Page extract]}

Flexion

On utilise des tests de flexion car c'est un moyen de déterminer la réaction d'un élément lorsqu'il est soumis à des forces opposées sur une même étendue. Il permet d'évaluer à la fois la ductilité et la solidité d'un matériau.

995

^{[Page extract]}

Compressive shear

Compressive shear testing is simply the pushing apart of a material specimen by applying compressive force from opposite sides in a parallel plane. In this way, the material is stressed in a sliding motion.

996

^{[Page extract]}

Friction

'Dry' friction (as opposed to 'fluid' or 'lubricated' friction) is the force resisting lateral motion between two solid surfaces in contact. It divides into:

997

^{[Page extract]}

Closure torque

Closures and caps must be applied tight enough to maintain a seal and to resist working loose, but they must not be applied so tightly that the end user cannot reasonably remove them.

998

^{[Page extract]}

Friction

Le frottement «sec» (par opposition au frottement «fluide» ou «lubrifié») est la force qui résiste au mouvement latéral entre deux surfaces solides en contact. Il se divise en:

999

^{[Page extract]}

Paper & Board

Paper and board are used in a wide range of applications and, as such, they undergo various stages of processing which place significant demands on their material strength.

1000

^{[Page extract]}

ASTM D5034-09

This test method covers the grab and modified grab test procedures for determining the breaking strength and elongation of most textile fabrics. Provisions are made for wet testing.