Search results
601
Accessory
Test Hook (large), 2.5 kN, 5-16 UNC
432-122
Large Test Hook fitted with 5-16 UNC female thread. Used for general purpose tension tests.
602
Case study
Inline respiratory filter pull test
Customised engineering example
A manufacturer of filtration products needed to test the extraction force of a respiratory filter when pulled from within an inline medical device.
603
[Page extract]
Machines d'essai universelles
Pour évaluer la qualité d'un produit fini ou d'un composant, il est souvent nécessaire d'effectuer plusieurs tests de force.
604
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
605
Accessory
Set of 4 fixing pegs for torque testers - 100mm high
432-250
Set of 100mm high extended-length gripping pegs.
These gripping pegs have a soft-rubber sleeve to clamp and keep taller samples secure and vertically aligned during torque testing.
Pegs are fitted with an M6 thread and attach to upper and lower…
606
Case study
Closure torque validation
Requirement
The customer had a number of Tornado closure torque testers, and wished to carry out regular validation checks without the need to return the units to either Mecmesin or an approved laboratory.
607
Event
180 Peel Testing Webinar (9 Feb. 2022)
Across many households and industries, consumers have developed a strong preference for and confidence in ‘Duct Tape’ for all types of uses and applications. This is mainly due to the adhesion strength.
608
[Page extract]
Test de force
Le test de force est un moyen de déterminer la réaction d’un objet lorsqu’il est soumis à des efforts de traction ou de compression - soit pendant son fonctionnement normal, soit lorsqu
609
Event
Essentials of Consumer Packaging Testing
Maximize COST SAVINGS for your consumer packaging by minimizing excess material and “over design” while keeping your products protected in transit.
610
Case study
Injection moulded assembly integrity
Customised engineering example
Plastic injection-moulded subassemblies are often clipped or welded together, and the integrity of the whole must be tested at several points.
611
Case study
Testeur de force de pincement de la porte de train
Exigence
South West Trains avait besoin d’un système permettant de mesurer la force de pincement lors de la fermeture de leurs portes automatiques externes.
612
Case study
Semi-automated penetration testing into plasterboard
Customised engineering example
British Gypsum (now Saint-Gobain) carry out repetitive penetration tests to accurately assess the performance and durability of their products.
613
Test Frame
Banc d'essai MultiTest double colonne
Banc d'essai MultiTest
Banc d'essai motorisé entraîné par deux vis à billes double colonne et conçu pour appliquer une traction et une compression de 2 N à 50 kN (1100 lbf).
Sa construction polyvalente le rend parfaitement…
614
Event
Needle Sharpness & Puncture Resistance Testing
Hypodermic needles are tested to determine how their design influences the ease of insertion into the skin, patient pain and skin trauma.
615
[Page extract]
BS EN ISO 13127
This standard is only to verify that panel-tested closures with minor modifications are still compliant, by applying mechanical tests as more economical than further full panel tests with children and with adults.
616
Case study
Test de couple de fermeture des bouteilles pour semences
Exigence
Les jardins botaniques royaux de Kew ont lancé une initiative internationale de conservation visant à préserver les spécimens de semences de plus de 24 000 espèces de plantes, en les protégeant de l'extinction au Millennium Seed Bank
617
Case study
Physiological measurement of joint strength
Requirement
The La Trobe University in Melbourne required a device to test the first Metatarsophalangeal joint, commonly known as the big toe. They wanted to compare different patients toe strength.
618
Case study
Torsion spring testing
Customised engineering example
Unlike most compression and tension springs, torsion springs are produced in a variety of forms with differing leg positions.
619
Event
Materials Testing: Theory and Practice Pt. 1
Materials testing is often the last step in the manufacturing process. Yet, quality is the result of both the process and the material. If the material that goes into the product is inadequate or defective, then the product may be deficient or faulty.
620
Accessory
Stainless steel Plates for peel testing on FPT-H1 , set of 5
432-652
Set of 5 pieces of Stainless Steel having 2" width x 5" length (51mm x 127mm). Used for preparing test specimens of pressure-sensitive adhesive tapes and films for testing in accordance with international standards. FINAT, ASTM D3330, PSTC 101 etc..…
621
[Page extract]
Essais de matériaux
L’une des missions des scientifiques spécialistes des matériaux est de mettre au point des processus plus efficaces pour développer des matériaux plus légers, plus solides et plus durables.
622
Case study
Hygienic disposal bin closure testing
Customised engineering example
A manufacturer of hygienic disposal bins came to us with a nappy (diaper) disposal unit fitted with a rotary intake mechanism.
623
Accessory
Interface cable, BFG to MultiTest-d, RS232 data transfer only
351-076
Connects the BFG to a MultiTest-d for RS232 data comms transfer only.
Comprises 15-pin female D-connector to 25-pin male D-connector.
For transfer of data from MultiTest-d to PC, choose also either the 432-450 or 351-051 cables.
624
Event
Materials Testing: Theory and Practice Pt. 2
Materials testing is often the last step in the manufacturing process. Yet, quality is the result of both the process and the material. If the material that goes into the product is inadequate or defective, then the product may be deficient or faulty.
625
Accessory
Float-glass Plates for peel testing on FTP-H1, set of 5
432-651
Set of 5 pieces of Float-glass Plates having 2" width x 5" length (51mm x 127mm). Used for preparing test specimens of pressure-sensitive adhesive tapes and films for testing in accordance with international standards. FINAT, ASTM D3330, PSTC 101 etc…