Mecmesin | Search results

1901

^{[Page extract]}

ASTM D3471

This test method covers the determination of the top-load required to engage lugs on Type IA child-resistant closures.

1902

^{[Page extract]}

ASTM D2344 is a test method, which determines the short-beam strength of high-modulus fiber-reinforced composite materials. It is applicable to all types of parallel fiber reinforced plastics and composites.

1903

^{[Page extract]}

ASTM D6713-14

Materials shall be tested and the individual grades shall conform to specified values of the physical properties such as tensile strength, tensile elongation, tensile modulus, dimensional stability, flexural modulus, and Izod impact; and dimensional pro

1904

^{[Page extract]}

ASTM D3826

ASTM D3826 is a tensile test method, which covers a degradation-end point, or a brittle point) for degradable polyethylene/polypropylene films and sheeting less than 1.0 mm thick.

1905

^{[Page extract]}

ISO 8510-2

Specifies a 180° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends where one adherend is flexible and the other is rigid.

1906

^{[Page extract]}

BS EN ISO 13262

BS EN ISO 13262 is test method to determine the tensile strength of seams on thermoplastics spirally-formed structured-wall pipes.

1907

^{[Page extract]}

ASTM D4476 / D4476M-14

ASTM D4476 is a test method used to determine the flexural properties of fiber-reinforced pultruded plastic rods. The specimen used is a rod with a semi-circular cross section, moulded or cut from lengths of pultruded rods.

1908

^{[Page extract]}

BS EN ISO 22088-2

BS EN ISO 22088-2 is a test method for determining the environmental stress cracking of plastics. This has replaced BS EN ISO 6252:1998

1909

^{[Page extract]}

SAE J1525

This SAE Recommended Practice describes a lap shear test method for use in measuring the bonding characteristics of automotive-type adhesives for joining fiber reinforced plastics to themselves and to metals.

1910

Event

Webinar: Rice Texture Analyzer (Thai) - เทคโนโลยีเครื่องมือวัด และมาตรฐานการทดสอบข้าว

เทคโนโลยีเครื่องมือวัด และมาตรฐานการทดสอบข้าว หนึ่งในปัจจัยที่สําคัญที่สุด ซึ่งมีผลต่อความสำเร็จของผลิตภัณฑ์ข้าวคือ เนื้อสัมผัส เนื้อสัมผัสของข้าวส่งผลโดยตรงต่อความพึงพอใจของผู้บริโภค และความน่าเชื่อถือของผู้ผลิตข้าว นั่นคือเหตุผลว่า

1911

^{[Page extract]}

BS EN ISO 80369-7

This part of ISO 80369 specifies dimensions and requirements for the design and functional performance of small-bore connectors intended to be used for connections in intravascular applications or hypodermic connections in hypodermic applications of med

1912

^{[Page extract]}

FINAT FTM3

This test method allows the end user to determine the force required to separate the release backing from the pressure sensitive adhesive coated face material.

1913

^{[Page extract]}

ASTM C907

This test method covers a laboratory procedure for determining the tensile adhesive strength of a preformed tape sealant. The type of failure can be determined, and the degree of cohesive/adhesive failure can be estimated.

1914

^{[Page extract]}

CETIE Guide 3

This guide is for producers of quality sparkling wines who carry out the secondary fermentation process in the bottle, also known as bottle fermentation.

1915

^{[Page extract]}

ASTM C364

This test method covers the compressive properties of structural sandwich construction in a direction parallel to the sandwich facing plane.

1916

^{[Page extract]}

MIL AS23190A

AS23190 is a procurement specification that covers a series of plastic and metal components and devices used for the tying, positioning, and supporting cable, cable assemblies, wire, and wire bundles in electrical, electronic and communication equipment

1917

^{[Page extract]}

29 073-3

Textiles: test method for nonwovens; Part 3: Determination of tensile strength and elongation.

1918

^{[Page extract]}

*corp Coca-Cola SM-PR-2645

This test ensures that the column strength of non-refillable (NR) plastic bottles is sufficient to meet minimum performance specifications for vertical loading during peak load application.

1919

^{[Page extract]}

ASTM D2918

This test method provides data for assessing the durabilities of adhesive joints by means of T-peel type specimens stressed in contact with air, air in equilibrium with certain solutions, water, aqueous solutions, or other environments at various temper

1920

^{[Page extract]}

ASTM C598

This test method covers the determination of the annealing point and the strain point of a glass by measuring the rate of midpoint viscous bending of a simply loaded glass beam.

1921

^{[Page extract]}

BS EN 5350-C5

Adhesives, Test methods, Adhesive strength, Longitudinal, Strength of materials, Shear strength, Dimensional tolerances

1922

^{[Page extract]}

ASTM C1161

This test method covers the determination of flexural strength of advanced ceramic materials at ambient temperature. Four-point and three-point loadings with prescribed spans are the standard.

1923

^{[Page extract]}

ASTM D5467 / D5467M-97

ASTM D5467 is a test method that determines the in-plane compressive properties of polymer matrix composite materials reinforced by high-modulus fibers in a sandwich beam configuration.

1924

^{[Page extract]}

ASTM D3968

This test method covers the measurement of rotational torques of Type IIIA child-resistant closures as a means of monitoring normal functioning of the child-resistant package.

1925

^{[Page extract]}

Keilspannzeuge

Keilspannzeuge - bestehend aus 2 austauschbaren oder festen Backen in Form eines Keils, die in einem Metallkörper befestigt sind.