Mecmesin | Search results

1926

^{[Page extract]}

ASTM D1708

ASTM D1708 is used to determine the tensile and elongation properties of small plastic microtensile specimens. These plastic specimens can be of any thickness up to 3.2 mm (1/8 in), including thin films. This test method does not require the use of an

1927

^{[Page extract]}

BS 6319-7

BS 6319-7 is a test method for determining the tensile strength of resin and polymer/cement compositions for use in construction.

1928

^{[Page extract]}

ASTM D378

The ASTM D378 test method is used for evaluating the physical properties of flat conveyor belting, which are used in many industrial applications in which they are subjected to a great variety of stresses and conditions.

1929

^{[Page extract]}

ASTM D4760-91

This test method determines the proper resecuring of continuous thread child-resistant closures.

1930

^{[Page extract]}

ISO 1966

Describes the design requirements and tests for the crimping of insulated and non-insulated terminations to general purpose cables, with conductors of copper, copper alloy, aluminium or aluminium alloy, in locations in which the stabilized conductor tem

1931

^{[Page extract]}

BS EN ISO 10066

BS EN ISO 10066 is a test method for determining creep in tension of flexible cellular polymeric materials.

1932

^{[Page extract]}

ASTM D5528-13

ASTM D5528 is a test method, which determines the opening Mode I interlaminar fracture toughness of continuous fiber-reinforced composite materials. It uses a a double cantilever beam (DCB) specimen. Susceptibility to delamination is one of the major

1933

^{[Page extract]}

ISO 10964

The test method described is used to make comparative assessments of the securing or locking effect of anaerobic adhesives. It may be used for other types of adhesives.

1934

^{[Page extract]}

ASTM D6746-15

ASTM D6746 is a test standard that covers methods to evaluate a characteristic of raw rubber or unvulcanized rubber compounds that is designated as green strength.

1935

^{[Page extract]}

ANSI/EIA 364

Mating and Unmating Procedure for Force Testing of Electrical Connectors and Sockets

1936

^{[Page extract]}

TAPPI T 824

This test evaluates the ability of corrugating medium to contribute to the compression strength of a corrugated box.

1937

^{[Page extract]}

BS EN 868-5

Provides examples of particular requirements and test methods for heat and self-sealable pouches and reels manufactured from paper complying with EN 868-3 and plastic film complying with clause 4 of this European standard.

1938

^{[Page extract]}

ASTM E328-02

These test methods cover the determination of the time dependence of stress (stress relaxation) in materials and structures under conditions of approximately constant constraint, constant environment, and negligible vibration.

1939

^{[Page extract]}

CETIE Guide 2

This guide applies to the screw capping of non-carbonated beverages and products with a metallic tamper-evident closure. Bottles may also be fitted with an in-bore insert for product flow control or to prevent re-filling.

1940

^{[Page extract]}

ASTM D4027-98

This test method describes equipment and procedures to measure the shear modulus and shear strength of adhesive layers between rigid adherends.

1941

^{[Page extract]}

ISO 15359

This International Standard specifies, a friction-testing method based on the horizontal plane principle, and the procedure for the determination of the static coefficient of friction before, and static and kinetic coefficients of friction after, a spec

1942

^{[Page extract]}

BS EN ISO 7864

BS EN ISO 7864:2016 specifies requirements for sterile hypodermic needles for single use of designated metric sizes 0,18 mm to 1,2 mm.

1943

^{[Page extract]}

ASTM D4501-01

This test method describes a procedure and fixture used to determine shear strengths of adhesives used to bond materials with moduli higher than the modulus of the adhesive.

1944

^{[Page extract]}

CETIE Guide 7

This guideline applies to the screw capping of still wines with a metallic closure having a threaded plastic insert and a tamper-evident band which needs to be snapped before it can be opened. The closure is screwed and crimped during capping.

1945

^{[Page extract]}

IEC 61210

IEC 61210:2010 applies to non-insulated flat quick-connect terminations consisting of a male tab of size 2,8 mm, 4,8 mm, 6,3 mm or 9,5 mm with hole or dimple detents and a mating female connector for use as either an incorporated or an integrated part o

1946

^{[Page extract]}

ASTM D3846

ASTM D3486 is a test method used for evaluating the in-plane strength of reinforced thermosetting plastics in flat sheet form in thicknesses ranging from 2.54 to 6.60 mm.

1947

^{[Page extract]}

BS EN 12445

This standard specifies the test methods to be applied to a power operated door to demonstrate compliance with the requirements specidied in EN 12453: 2000 in particular it specifies the method of measuring the forces developed by a power operated door.

1948

^{[Page extract]}

Druck

Druckproben werden durchgeführt, um die Leistung eines Materials oder einer Komponente unter allmählich zunehmender Druckbelastung zu bewerten.

1949

^{[Page extract]}

ASTM D3044

This test method covers determination of the shear modulus of wood-based structural panels associated with shear distortion in the plane of the panels. The method is applicable to all types of wood-based structural panels.

1950

^{[Page extract]}

ASTM D6797-07

This test method describes the measurement for bursting strength of woven and knitted textiles taken from rolls of fabric or fabric taken from garments.