Search results
1001
Accessory
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1002
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…
1003
Accessory
Self-levelling Compression Plate Steel - 96 mm, 25 kN, QC-20 fitting
MecS223k-96
MecS223k - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1004
Accessory
Radiused Probe - 11 mm, 500 N, 10-32 UNF
432-355
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
8mm tip rising to 11mm outer diameter. Fitted with 10-32 UNF female…
1005
Accessory
Custom-made Safety Guards and Enclosures
PDVguard
Where the standard safety guard does not fulfil your application requirements, Mecmesin can work with you to design and produce a custom-made safety guard to meet your exact requirements. Suitable for any Mecmesin test stand. Previously-designed guards…
1006
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
1007
Accessory
Mounting Plate for CFG+ Compact Force Gauge
432-131
Allows a CFG+ Compact Force Gauge to be mounted onto the crosshead of a test stand. Fixing screws included.
1008
Accessory
Compression Plate, Vented by Holes & Cone, 50 mm, 5-16 UNC
432-348
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1009
Accessory
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…
1010
Accessory
Lever-operated Cam Grip (small serrated), 500 N, 10-32 UNF
432-383
The small Lever-operated Cam Grip is designed with a plated 30mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also allows for quick insertion and release of samples.
Fitted with a 10-32 UNF female…
1011
Accessory
Compression Plate, Rubber-Faced, 50 mm, 5-16 UNC
432-219
50mm nickel-plated compression plate featuring a rubber layer, which helps to prevent damage from metal-to-metal contact during a compression test.
Fitted with 5-16 UNC female thread.
Nickel-plated compression plates are resistant to rusting.
1012
Accessory
Self-levelling Compression Plate Steel - 96 mm, 50 kN, QC-32 fitting
MecS223g-96
MecS223g - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1013
Accessory
Adapter, 5 kN, 5-16 UNC to 5-16 UNC, F to F
432-293
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1014
Accessory
QC Type L Adapter, 32 mm M, c/w pin and fixing screws
432-451
QC Male Post 32mm c/w cross-pin, locking collar…
1015
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1016
Accessory
Interlock override plug
PDV12034-01
Plug for use with software-controlled "-i" and "-xt" systems. It allows an interlocked guard to be used in non-interlock mode.
Helps when first setting up trial test programmes.
1017
Accessory
Adapter, 5 kN, 5-16 UNC to M12, M to F
432-332
Male-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1018
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
1019
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1020
Accessory
Small Pneumatic Plane Grips - rubber-faced jaws, 200 N, Pair, QC-20 fitting
432-275
A pair of pneumatically-operated, single-action Small Pneumatic Plane Grips with an opening of 0-8mm.
Each 10mm x 10mm jaw is fitted with a rubber-faced surface. The specimen is held between the fixed jaw and the moving jaw, which clamps the specimen in…
1021
Accessory
Self-levelling Compression Plate Steel - 56 mm, 25 kN, QC-20 fitting
MecS223k-56
MecS223k - 56mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1022
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1023
Accessory
Compression Plate, Nickel-plated, Vented by Holes & Cone, 50 mm, 10-32 UNF
432-347
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1024
Accessory
1/2" upper chuck assembly for use on Helixa sensors (3 N.m & 6 N.m only)
432-617
A standard self-centering 3-jaw chuck with key.
It has a maximum ½" (12.7 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
1025
Accessory
Compression Plate, Hardened and Ground, 50 mm, 10-32 UNF
432-172 F95
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
50mm diameter having 10-32 UNF female thread.