Category
Part Number
MecS470
Description
The 2 KN Pinch Grip is fitted with 25mm high x 25mm wide pyramid jaw faces to ensure samples are held securely for tensile tests below 2 kN.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 10mm. Fast installation and release of samples is achieved by manually tightening the wing nut.
Fitted with a QC-15.9mm hole and supplied with an adaptor to QC-20mm hole for connection to the base of a test stand or loadcell.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 10mm. Fast installation and release of samples is achieved by manually tightening the wing nut.
Fitted with a QC-15.9mm hole and supplied with an adaptor to QC-20mm hole for connection to the base of a test stand or loadcell.
Images
![2 kN pinch grip, QC fitting 2 kN pinch grip, QC fitting](/sites/default/files/styles/medium/public/part/2024-04/1332-Mec-S470.jpg.webp?itok=LCwbnwg3)
Related Parts
Fittings
Quick Change |
---|
20 mm |
Weight
452 g
![Nói chuyện với chuyên gia về các phụ kiện thử nghiệm lực và mô-men xoắn, tay cầm và đồ đạc, danh mục đầy đủ trực tuyến trên máy tính, máy tính bảng và điện thoại di động, của Mecmesin](https://s3.eu-west-2.amazonaws.com/assets.mecmesin.com/images/content/contact_mecmesin_tablet-accessories.jpg)
Nói chuyện với một chuyên gia
Có một câu hỏi về phụ kiện này? Hãy liên hệ và nói chuyện với một trong những Kỹ sư Bán hàng Kỹ thuật của chúng tôi ngay bây giờ ...