Category
Part Number
Mec9
Description
MEC9 Thin Wire Grip
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the carrier to hold the jaws .. jaws sold separately.
Fitted with QC-20mm female hole for fixing to the base of a test stand or loadcell.
Designed to hold wires or cords when tensile testing up to 2.5 kN.
The specimen is initially wrapped around a bollard and then secured by manually clamping between either blank or diamond-coated jaws. The Mec9 is supplied with the carrier to hold the jaws .. jaws sold separately.
Fitted with QC-20mm female hole for fixing to the base of a test stand or loadcell.
Images
Datasheet
2.5 kN Screw-action Thin Wire Grips, pair, QC fitting DS-1069-04-L00
Related Parts
Load Rating
2.5 kN
( 550 lbf )
Fittings
| Quick Change |
|---|
| 20 mm |
Weight
380 g
Diagram
Mec9(Ko,2Ko) Pneumatic Wire Grip DIMLESS
Nói chuyện với một chuyên gia
Có một câu hỏi về phụ kiện này? Hãy liên hệ và nói chuyện với một trong những Kỹ sư Bán hàng Kỹ thuật của chúng tôi ngay bây giờ ...