Part Number
PDV15031
Description
The FINAT 2 Assisted Pull-Peel table (90° Peel Test) is fitted to the anvil plate of a motorised test stand and then connected to the crosshead of a test stand. It is commonly used for conducting peel tests on adhesive tapes and films.
The carriage of the peel table is directly driven horizontally by the vertical movement of the test stand crosshead. This maintains a constant peel angle of 90 degrees.
The carriage is equipped with adjustable rails into which float-glass can be inserted. Float-glass is used as a standardised surface onto which the specimen is adhered. Float-glass to be ordered separately (part numbers PSV15030 and PSV15031).
Fitted with an adaptor having QC-20mm female hole
The carriage of the peel table is directly driven horizontally by the vertical movement of the test stand crosshead. This maintains a constant peel angle of 90 degrees.
The carriage is equipped with adjustable rails into which float-glass can be inserted. Float-glass is used as a standardised surface onto which the specimen is adhered. Float-glass to be ordered separately (part numbers PSV15030 and PSV15031).
Fitted with an adaptor having QC-20mm female hole
Images
Fittings
Nói chuyện với một chuyên gia
Có một câu hỏi về phụ kiện này? Hãy liên hệ và nói chuyện với một trong những Kỹ sư Bán hàng Kỹ thuật của chúng tôi ngay bây giờ ...