Mecmesin | Search results

1626

^{[Page extract]}

BS EN ISO 12230

This European Standard specifies a method for the determination of the tensile properties of materials used as surfaces for sports areas.

1627

^{[Page extract]}

This guide applies to the screw capping of non-carbonated beverages and products with a metallic tamper-evident closure. Bottles may also be fitted with an in-bore insert for product flow control or to prevent re-filling.

1628

^{[Page extract]}

ISO 15359

This International Standard specifies, a friction-testing method based on the horizontal plane principle, and the procedure for the determination of the static coefficient of friction before, and static and kinetic coefficients of friction after, a spec

1629

^{[Page extract]}

ASTM E328-02

These test methods cover the determination of the time dependence of stress (stress relaxation) in materials and structures under conditions of approximately constant constraint, constant environment, and negligible vibration.

1630

^{[Page extract]}

BS EN ISO 7864

BS EN ISO 7864:2016 specifies requirements for sterile hypodermic needles for single use of designated metric sizes 0,18 mm to 1,2 mm.

1631

^{[Page extract]}

ASTM D4027-98

This test method describes equipment and procedures to measure the shear modulus and shear strength of adhesive layers between rigid adherends.

1632

^{[Page extract]}

ASTM D3846

ASTM D3486 is a test method used for evaluating the in-plane strength of reinforced thermosetting plastics in flat sheet form in thicknesses ranging from 2.54 to 6.60 mm.

1633

^{[Page extract]}

ASTM D1894

This test method is used to measure the friction of plastic film and sheeting. It determines the kinetic (moving) and static (starting) resistance of one surface being dragged across another.

1634

^{[Page extract]}

BS EN 12445

This standard specifies the test methods to be applied to a power operated door to demonstrate compliance with the requirements specidied in EN 12453: 2000 in particular it specifies the method of measuring the forces developed by a power operated door.

1635

^{[Page extract]}

ASTM D6496-04a

This test method covers the laboratory determination of the average bonding strength between the top and bottom layers of a sample of a geosynthetic clay liner.

1636

^{[Page extract]}

ASTM D3044

This test method covers determination of the shear modulus of wood-based structural panels associated with shear distortion in the plane of the panels. The method is applicable to all types of wood-based structural panels.

1637

^{[Page extract]}

ASTM D6797-07

This test method describes the measurement for bursting strength of woven and knitted textiles taken from rolls of fabric or fabric taken from garments.

1638

^{[Page extract]}

ASTM C1684

This test method is for the determination of flexural strength of rod shape specimens of advanced ceramic materials at ambient temperature.

1639

^{[Page extract]}

BS 1726-3

Springs, Helical springs, Cylindrical shape, Torque, Circular shape, Wires, Bars (materials), Parallel, Dimensional tolerances, Form tolerances, Product specification, Ordering, Mechanical testing, Heat treatment

1640

^{[Page extract]}

*corp QAC-MC-844

Confidential to l'Oreal The aim of this test is to check that folding boxes form properly so as to ensure their fluidity of distribution on the filling and packing lines.

1641

^{[Page extract]}

IEC 60512-13-1

Details a standard test method to measure the force to fully engage or separate mating connectors, including the effect of any locking, latching, sealing, engaging, separating or similar device, that assists or resists such operation.

1642

^{[Page extract]}

ASTM C165

1.1 This test method covers two procedures for determining the compressive resistance of thermal insulations.

1643

^{[Page extract]}

ASTM D7078/D7078M-12

This test method covers the determination of the shear properties of high-modulus fiber-reinforced composite materials by clamping the ends of a V-notched specimen between two pairs of loading rails.

1644

^{[Page extract]}

ISO 8094

ISO 8094 specifies a test method for determining the adhesion strength of the cover to the core layer. It applies exclusively to steel cord conveyor belts.

1645

^{[Page extract]}

MIL STD-202H

Method 211A to be found on pages 174-179

1646

^{[Page extract]}

ISO 1924-3

Specifies a method for measuring the tensile strength, strain at break, tensile energy absorption and tensile stiffness, using a testing machine operating with a constant rate of elongation (100 mm/min).

1647

^{[Page extract]}

BS 6319-6

BS 6319-6 is a test method for determining the modulus of elasticity in compression of resin and polymer/cement compositions for use in construction.

1648

^{[Page extract]}

ASTM D790-17

ASTM D790 is used to determine the flexural properties of unreinforced and reinforced plastics, including high modulus composites and electrical insulating materials utilizing a three-point loading system to apply a load to a simply supported beam (spec

1649

^{[Page extract]}

ISO 1966

Describes the design requirements and tests for the crimping of insulated and non-insulated terminations to general purpose cables, with conductors of copper, copper alloy, aluminium or aluminium alloy, in locations in which the stabilized conductor tem

1650

^{[Page extract]}

BS EN ISO 10066

BS EN ISO 10066 is a test method for determining creep in tension of flexible cellular polymeric materials.