A versatile force and torque display unit, with interchangeable 'smart' sensors, that provides high accuracy and flexibility.
The AFTI can be used as a handheld device for mobile applications or it can be used as the measurement device for integration into your own test rig.
Got a question about a product? Your local representative is...
Mecmesin/PPT Group, UK
Force sensors
The AFTI and AFG are versatile force and torque indicators designed for use with the Mecmesin range of 'Smart' tension and compression loadcells.
Readings are displayed as live values with peak-hold function in both tension and compression. Data can be streamed as continuous or single readings for recording on PCs, printers and dataloggers.
Smart sensors for use with AFTI display or AFG
A range of interchangeable force sensors for measuring tension and compression with the AFTI display or AFG.
Each 'Smart' sensor is delivered with its own connecting cable, which has a proprietary plug containing the calibration data for instant recognition by the AFTI.
All 'Smart' sensors read from zero and are delivered at no extra cost with a full calibration certificate traceable to national standards.
Tension & Compression - S-beam
A range of 'Smart' S-beam shaped loadcells for measuring tension and compression. Various models to measure from 0 - 100 N right through to 0 - 100 kN.
Tension & Compression - S-beam (Junior)
A range of 'Smart' loadcells in a miniature S-beam shape. Suitable for measuring tension and compression for applications where available space is limited. Various models to measure from 0 - 1 N right through to 0 - 500 N.
Compression only - Load Button
A range of 'Smart' sensors for compression measurement only. Available in miniature and sub-miniature sizes for use where space is very limited. Compressive load is applied to the top of the sensor’s central dome. Various models to measure from 0 - 100 N right through to 0 - 50 kN.
Specialised Loadcells
In addition to the standard range of tension and compressions sensors, Mecmesin also offers specialised loadcells dedicated to specific applications. A few examples are shown below.
Torque sensors
The AFTI and AFG are versatile force and torque indicators designed for use with the Mecmesin range of 'Smart' static and rotary torque sensors.
Readings are displayed as live values with peak-hold function in both clockwise and counter-clockwise directions. Data can be streamed as continuous or single readings for recording on PCs, printers and dataloggers.
Smart sensors for use with AFTI display or AFG
A range of interchangeable torque sensors for measuring static and rotary torque with the AFTI display or AFG.
Each 'Smart' sensor is delivered with its own connecting cable, which has a proprietary plug containing the calibration data for instant recognition by the AFTI.
All 'Smart' sensors read from zero and are delivered at no extra cost with a full calibration certificate traceable to national standards.
Rotary Torque Transducer - Mini (low-torque)
Range of 'Smart' mini sensors for measuring rotary torque from
Rotary Torque Transducer (mid- & high-torque)
A range of 'Smart' sensors for measuring rotary torque from
Static Torque Transducer (low-torque)
A range of 'Smart' sensors for measuring static torque from
Suitable for bench-mounting or integration into a complete test rig. Equipped with 1/4" hex drive (or 3mm bore) for the fitting of adaptors.
Static Torque Transducer (mid- & high-torque)
A range of 'Smart' sensors for measuring static torque from
Suitable for bench-mounting or integration into a complete test rig. Equipped with a square-drive of 3/8" to 1" for the fitting of adaptors.
Static Torque Screwdriver - Mini (low-torque)
A range of fine-precision, low-capacity torque screwdrivers for handheld applications. Suitable for the measurement of very fine static torque from
Note: If your application requires multiple rotations of the sensor in one direction, we recommend using a rotary torque transducer.
Static Torque Screwdriver (mid-torque)
A range of mid-capacity torque screwdrivers for handheld applications. Suitable for the measurement of static torque from
Note: If your application requires multiple rotations of the sensor in one direction, we recommend using a rotary torque transducer.
Emperor™ Software
VectorPro® Lite software
Available as an optional extra to Mecmesin's Orbis, Tornado and AFTI digital force and torque testing instruments, VectorPro Lite is an advanced data acquisition and plotting software package.
Simply select the appropriate interface cable for your Mecmesin torque instrument and you are ready to enhance your testing with the power of VectorPro Lite.
Advanced data acquisition and plotting
Live torque values are captured and automatically sent to VectorPro Lite to plot the graph of torque vs time/angle. This helps to visually identify any events during the test which cannot be picked up by just having a peak reading on the instrument display.
To help determine whether your sample has met the necessary criteria, there is a suite of standard calculations with indicators of pass or fail to immediately alert the operator.
A statistical analysis of results per batch of samples is produced and then incorporated, together with the graphs, into a customisable PDF or csv test report for your customer.
Overview
The Advanced Force and Torque Indicator (AFTI) is a high-specification display unit, for use with Mecmesin's 'Smart' force and torque sensors.
Ideal for use in production, quality-control or in research and development, its dual-function keypad makes operation simple. With its rugged housing being machined from lightweight aluminium, the ergonomic AFTI is powered through a mains adaptor (supplied) or standard rechargeable AAA batteries.
Interchangeable 'Smart' sensors are plug and play. Simply connect a force or torque sensor to the AFTI and its calibration data will be automatically recognised without any operator input required.
Measurement
Tension, compression and torque measurement with peak-hold function and full unit conversion of the displayed value.
Operating at an internal sampling rate of 5,000 Hz measurements can be displayed in:
- N.m, mN.m, cN.m, daN.m
- kgf.cm, gf.cm
- lbf.in, lbf.ft, ozf.in
- N, mN, cN, daN, kN
- kgf, gf
- lbf, ozf
Features
Clear 4 ½ digit backlit display featuring an overload warning with trend bar to alert operators. Audible and visual pass/ fail indicators clearly signal when displayed readings lie within tolerance.
An onboard memory to store 500 peak readings.
Connectivity
RS232, digimatic and analogue data output are all standard to allow easy data transfer to PCs, printers and dataloggers. Choose from a selection of interface cables to connect to your device.
Torque measurement
To get even more from your AFTI display, there's a range of 'Smart' static and rotary torque sensors to choose from. Simply unplug your force loadcell and plug-in your torque sensor.
Product datasheets
Product Brochures
Digital Force and Torque Gauges - Brochure (PDF)
Digital Force and Torque Sensors - Brochure (PDF)
Interface Cables - Datasheet (PDF)
Features and benefits
Smart sensors for use with AFTI display
A range of interchangeable force sensors for measuring tension and compression with the AFTI.
Each 'Smart' sensor is delivered with its own connecting cable, which has a proprietary plug containing the calibration data for instant recognition by the AFTI.
All 'Smart' sensors read from zero and are delivered at no extra cost with a full calibration certificate traceable to national standards.
Tension & Compression - S-beam
A range of 'Smart' S-beam shaped loadcells for measuring tension and compression.
Various models to measure from
Accuracy ± 0.25% of full scale.
|
S-beam Model |
S- 100N |
S- 200N |
S- 500N |
S- 1000N |
S- 2500N |
S- 5000N |
S- 10kN |
S- 25kN |
|---|---|---|---|---|---|---|---|---|
| N | 100 | 200 | 500 | 1000 | 2500 | 5000 | 10 000 | 25 000 |
| kgf | 10 | 20 | 50 | 100 | 250 | 500 | 1000 | 2500 |
| lbf | 22 | 44 | 110 | 220 | 550 | 1100 | 2200 | 5500 |
| Cylindrical Model | C- 50kN |
C- 100kN |
|---|---|---|
| kN | 50 | 100 |
| kgf | 5000 | 10 000 |
| lbf | 11 000 | 22 000 |
Tension & Compression - S-beam (Junior)
A range of 'Smart' loadcells in a miniature S-beam shape. Suitable for measuring tension and compression in applications where the available space is limited.
Various models measuring from
Accuracy ± 0.25% of full scale.
|
Junior S-beam Model |
JS- 1N |
JS- 2.5N |
JS- 5N |
JS- 10N |
JS- 25N |
JS- 50N |
JS- 100N |
JS- 250N |
JS- 500N |
|---|---|---|---|---|---|---|---|---|---|
| N | 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 250 | 500 |
| kgf | 0.10 | 0.25 | 0.5 | 1 | 2.5 | 5 | 10 | 25 | 50 |
| lbf | 0.22 | 0.55 | 1.1 | 2.2 | 5.5 | 11 | 22 | 55 | 110 |
Compression - Load Button
A range of 'Smart' sensors for compression measurement only. Available in miniature and sub-miniature sizes for use where space is very limited.
Compressive load is applied to the top of the sensor's central dome. A range of models to measure from
Accuracy ± 1% of full scale.
| Load Button Model | LB- 100N |
LB- 250N |
LB- 500N |
LB- 1000N |
LB- 2500N |
LB- 5000N |
LB- 10kN |
LB- 25kN |
|---|---|---|---|---|---|---|---|---|
| N | 100 | 250 | 500 | 1000 | 2500 | 5000 | 10 000 | 25 000 |
| kgf | 10 | 25 | 50 | 100 | 250 | 500 | 1000 | 2500 |
| lbf | 22 | 50 | 110 | 220 | 550 | 1100 | 2200 | 5500 |
Specialised Loadcells
In addition to the standard range of tension and compression sensors, Mecmesin offer specialised loadcells dedicate to specific applications.
A few examples are shown below.
- Hand Gripper
- Donut Loadcell
- Pedal Force Sensor
Key applications
Got a question about a product? Your local representative is...
