Mecmesin | Search results

1951

^{[Page extract]}

BS ISO 6939

Applicable to spun single and folded yarns of any fibre or mixture of fibres manufactured by any spinning systems. Not recommended for testing filament yarns, glass yarns, more complex structures such as cabled yarns or cords.

1952

^{[Page extract]}

BS 7548

Describes requirements and test methods for sterile syringes with or without needles for single use solely for the injection of insulin in humans. Covers syringes for use with 40 units of

1953

^{[Page extract]}

ASTM D1708

ASTM D1708 is used to determine the tensile and elongation properties of small plastic microtensile specimens. These plastic specimens can be of any thickness up to 3.2 mm (1/8 in), including thin films. This test method does not require the use of an

1954

^{[Page extract]}

BS 6319-7

BS 6319-7 is a test method for determining the tensile strength of resin and polymer/cement compositions for use in construction.

1955

^{[Page extract]}

ASTM D378

The ASTM D378 test method is used for evaluating the physical properties of flat conveyor belting, which are used in many industrial applications in which they are subjected to a great variety of stresses and conditions.

1956

^{[Page extract]}

ISO 594-1

Specification of the requirements for conical (Luer) fittings for use with hyperdemic syringes and needles and with certain other apparatus for medical use such as transfusion and infusion sets.

1957

^{[Page extract]}

MIL C-39029

3.5.5: contact engagement and separation 3.5.8: tensile test of crimp

1958

^{[Page extract]}

BS ISO 2285

BS ISO 2285 is a test method for determining the tension set under constant elongation of vulcanised rubber or thermoplastic.

1959

^{[Page extract]}

FINAT FTM 9

This test method describes a means of assessing probably the most important and yet the hardest to measure property of pressure sensitive materials, the tack.

1960

Article/Campaign

Test title

Tensile Testing Solutions

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce ac ipsum varius, porttitor enim eu, porta ipsum. Quisque fermentum dolor est, in interdum purus tincidunt vitae.

1961

^{[Page extract]}

BS EN 868-5

Provides examples of particular requirements and test methods for heat and self-sealable pouches and reels manufactured from paper complying with EN 868-3 and plastic film complying with clause 4 of this European standard.

1962

^{[Page extract]}

ASTM E328-02

These test methods cover the determination of the time dependence of stress (stress relaxation) in materials and structures under conditions of approximately constant constraint, constant environment, and negligible vibration.

1963

^{[Page extract]}

CETIE Guide 2

This guide applies to the screw capping of non-carbonated beverages and products with a metallic tamper-evident closure. Bottles may also be fitted with an in-bore insert for product flow control or to prevent re-filling.

1964

^{[Page extract]}

ASTM D4027-98

This test method describes equipment and procedures to measure the shear modulus and shear strength of adhesive layers between rigid adherends.

1965

^{[Page extract]}

ISO 15359

This International Standard specifies, a friction-testing method based on the horizontal plane principle, and the procedure for the determination of the static coefficient of friction before, and static and kinetic coefficients of friction after, a spec

1966

^{[Page extract]}

BS EN ISO 7864

BS EN ISO 7864:2016 specifies requirements for sterile hypodermic needles for single use of designated metric sizes 0,18 mm to 1,2 mm.

1967

^{[Page extract]}

ASTM D3846

ASTM D3486 is a test method used for evaluating the in-plane strength of reinforced thermosetting plastics in flat sheet form in thicknesses ranging from 2.54 to 6.60 mm.

1968

^{[Page extract]}

ASTM D1894

This test method is used to measure the friction of plastic film and sheeting. It determines the kinetic (moving) and static (starting) resistance of one surface being dragged across another.

1969

^{[Page extract]}

BS EN 12445

This standard specifies the test methods to be applied to a power operated door to demonstrate compliance with the requirements specidied in EN 12453: 2000 in particular it specifies the method of measuring the forces developed by a power operated door.

1970

^{[Page extract]}

ASTM D6496-04a

This test method covers the laboratory determination of the average bonding strength between the top and bottom layers of a sample of a geosynthetic clay liner.

1971

^{[Page extract]}

ASTM D3044

This test method covers determination of the shear modulus of wood-based structural panels associated with shear distortion in the plane of the panels. The method is applicable to all types of wood-based structural panels.

1972

^{[Page extract]}

ASTM D6797-07

This test method describes the measurement for bursting strength of woven and knitted textiles taken from rolls of fabric or fabric taken from garments.

1973

^{[Page extract]}

ASTM C1684

This test method is for the determination of flexural strength of rod shape specimens of advanced ceramic materials at ambient temperature.

1974

^{[Page extract]}

BS 1726-3

Springs, Helical springs, Cylindrical shape, Torque, Circular shape, Wires, Bars (materials), Parallel, Dimensional tolerances, Form tolerances, Product specification, Ordering, Mechanical testing, Heat treatment

1975

^{[Page extract]}

*corp QAC-MC-844

Confidential to l'Oreal The aim of this test is to check that folding boxes form properly so as to ensure their fluidity of distribution on the filling and packing lines.