Search results
1176
Accessory
Adapter, 500N, 10-32 UNF to M6, F to F
432-417
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1177
Accessory
Scissor Grip, 50 kN, QC-32 fitting
Mec11-50
MEC11-50 (Body only) :
Scissor-action grip rated to 50 kN fitted with QC-32 connection. Locking function allows grip to remain open when inserting specimen.
Spring tension provides enough clamping force to prevent the specimen from slipping when…
1178
Accessory
Lightweight Vice Grip - Double Action, 250 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 250 N in tension with an…
1179
Accessory
Self-levelling Compression Plate Steel - 156 mm, 50 kN, QC-32 fitting
MecS223g-156
MecS223g - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1180
Accessory
Cable Cam Grip (large serrated), 5 kN, M10 or M12
432-108
Designed for holding insulated cables and wire. The sample is secured by the serrated cam, which self-tightens as load is applied and minimises the chance of sample slippage.
The grip body features a clearance hole and is supplied with an M10 and M12…
1181
Accessory
Spring-Loaded Fold Grip, 2 kN, QC-20 fitting
432-262
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the…
1182
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1183
Accessory
TS torque screwdriver chuck, 3/8"
432-233
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (10mm) opening and is connected to the ‘TS’ screwdriver via a square drive spindle. Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m
1184
Accessory
Adapter, 500N, M6 to M6, F to F
432-334
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1185
Accessory
Compression Plate, Vented by Holes & Cone, 50 mm, 5-16 UNC
432-348
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1186
Accessory
Cable Cam Grip (small), serrated, 1 kN, 10-32 UNF
432-390
Cable Cam Grip - serrated, small
Designed for holding insulated cables and wire. The sample is secured by the cam, which self-tightens as a load is applied and spreads the load evenly.
Serrated cams are preferred for materials which may be slippy and…
1187
Accessory
3/8" Lower Chuck Assembly for use on Helixa motor spindle
432-614
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw.
Used to secure a variety of test specimens for torque applications.
1188
Accessory
Padded Radiused Probe, 500 N, 5-16 UNC
432-414
The Padded Radiused Probe is used with a short extension rod to connect to a digital force gauge to measure tension and compression.
It has a thin layer of rubber and is specially designed for use in manual handling and ergonomic assessment applications…
1189
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).
1190
Accessory
Coefficient of Friction Fixture (ISO 8295)
432-501
Designed to measure the coefficient of friction (COF) to ISO 8295 between two pieces of material. The COF test determines the kinetic and static resistance of one surface being dragged across another. This friction table can be precisely leveled.
1191
Accessory
Scissor Grip, 5 kN, QC-20 fitting
Mec11-5
MEC11-5 Scissor-action grip (Body only) :
Rated to 5 kN fitted with QC-20 connection.
Spring tension provides enough clamping force to prevent the specimen from slipping when initially inserted. The rated tensile force changes according to the opening…
1192
Accessory
Spring-loaded Pinch Grip with Chain Link, 20 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
1193
Accessory
MDD scale bracket kit
432-160
Bracket Set only.
Used for mounting of a Mitutoyo ABS-type Digital Height Scale to the handwheel-operated Manual Test Stand model MDD.
Note: Height-scale not included
1194
Accessory
Needle Probe, stainless steel, 2 mm
432-087
The 2mm diameter needle probe is made from stainless steel and has an M3 female thread. It is designed for surface puncture and penetration tests.
Commonly used with extension rod M3 male to 10-32 UNF female ... part number 432-100
1195
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
1196
Accessory
Compression Plate, Rubber-Faced, 50 mm, 10-32 UNF
432-220
50mm nickel-plated compression plate featuring a rubber layer, which helps to prevent damage from metal-to-metal contact during a compression test. Fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
1197
Accessory
Adapter, 5 kN, 5-16 UNC to M10, M to M
432-333
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1198
Accessory
Compression Plate, Nickel-plated, Vented by Holes & Cone, 50 mm, 10-32 UNF
432-347
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1199
Accessory
Crosshead for Vortex-d & -dV, without sensor
432-474
A complete crosshead assembly for the Vortex-d and Vortex-dV motorised torque test stands.
The assembly comprises:
crosshead with fixing knobs,
movable central carriage on rods including top-plate holder
torque sensor mounting plate - (Note: sensor…
1200
Accessory
Lever-operated Cam Grip (small serrated), 500 N, 10-32 UNF
432-383
The small Lever-operated Cam Grip is designed with a plated 30mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also allows for quick insertion and release of samples.
Fitted with a 10-32 UNF female…