Search results
651
[Page extract]
BS EN ISO 13127
This standard is only to verify that panel-tested closures with minor modifications are still compliant, by applying mechanical tests as more economical than further full panel tests with children and with adults.
652
Case study
Injection moulded assembly integrity
Customised engineering example
Plastic injection-moulded subassemblies are often clipped or welded together, and the integrity of the whole must be tested at several points.
653
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
654
Accessory
Adjustable Test Hook, 50 N, 10-32 UNF
432-380
The Adjustable Test Hook is commonly used for securely holding smaller crimp terminals for tensile tests to various standards (e.g. IPC-620, UL 486, VW 60330, ISO 1966, BS 5G 178 etc...).
Max. load 50 N
Fitted with 10-32 UNF female thread and supplied…
655
Case study
Closure torque validation
Requirement
The customer had a number of Tornado closure torque testers, and wished to carry out regular validation checks without the need to return the units to either Mecmesin or an approved laboratory.
656
Accessory
Float-glass Plates for peel testing on FTP-H1, set of 5
432-651
Set of 5 pieces of Float-glass Plates having 2" width x 5" length (51mm x 127mm). Used for preparing test specimens of pressure-sensitive adhesive tapes and films for testing in accordance with international standards. FINAT, ASTM D3330, PSTC 101 etc…
657
Case study
Kart ve kağıdın kırışıklık direnci testi
Özel mühendislik örneği Bir ambalaj üretim şirketinin, tamamen kapalı kartonlarında kullanılan mürekkep kaplı kartın kırışma kuvvetini test etmesi gerekiyordu.
658
Accessory
Footswitch to simulate 'Start' on MultiTest-i and 'xt' stands
PDV14081
Footswitch to simulate 'Start' on '-i' and 'xt' stands from the Vortex, Helixa and MultiTest product families.
Used to free-up an operators hands for other operations (eg. holding a specimen between grips) when launching a test.
659
Accessory
Test Hook (large), 2.5 kN, 5-16 UNC
432-122
Large Test Hook fitted with 5-16 UNC female thread. Used for general purpose tension tests.
660
Event
Materials Testing: Theory and Practice Pt. 1
Materials testing is often the last step in the manufacturing process. Yet, quality is the result of both the process and the material. If the material that goes into the product is inadequate or defective, then the product may be deficient or faulty.
661
Event
Needle Sharpness & Puncture Resistance Testing
Hypodermic needles are tested to determine how their design influences the ease of insertion into the skin, patient pain and skin trauma.
662
Case study
Semi-automated penetration testing into plasterboard
Customised engineering example
British Gypsum (now Saint-Gobain) carry out repetitive penetration tests to accurately assess the performance and durability of their products.
663
Accessory
Wood Shear Test Jig, 25 kN, QC-20 or QC-32 fitting
Mec17
Wood Shear Tester DIN 52367, with torque-free shearing for wood samples according to ISO 6238, EN 392 and for glued laminated timber to BS 373. ASTM D143 version also available.
Connects to test stand and loadcell via QC 20mm or 32mm fixings. Please…
664
Case study
Kablo kanalı dayanım testi
Özel mühendislik örneği Müşterimiz kabloların ve optik fiberlerin yönlendirilmesi için borular ve kanallar üretmektedir. Bu tesislerin montajında üfleme, itme ve çekme teknikleri kullanılmaktadır.
665
Accessory
FINAT 1 Peel Jig for 180 degree testing, QC-20
PDV13016-C
FINAT 1 Peel Jig - 180°
A polished steel plate used for affixing pressure-sensitive adhesive tape in accordance with FINAT 1 test method and other international standards.
Fitted with an adaptor having QC-20mm female hole for connection to the base of…
666
Event
Top-load testing: Ensuring packaging integrity from production to transport
Top-load testing is the method used to simulate and measure the force exerted on packaging containers during production, filling, capping, storage, and transport.
667
Case study
Alçıpan içine yarı otomatik penetrasyon testi
Özel mühendislik örneği İngiliz Alçı (şimdi Saint-Gobain) ürünlerinin performansını ve dayanıklılığını doğru bir şekilde değerlendirmek için tekrarlayan penetrasyon testleri gerçekleştirmektedir.
668
Case study
Physiological measurement of joint strength
Requirement
The La Trobe University in Melbourne required a device to test the first Metatarsophalangeal joint, commonly known as the big toe. They wanted to compare different patients toe strength.
669
Event
Materials Testing: Theory and Practice Pt. 2
Materials testing is often the last step in the manufacturing process. Yet, quality is the result of both the process and the material. If the material that goes into the product is inadequate or defective, then the product may be deficient or faulty.
670
Event
Tensile Testing for Wiring Harness Connections Webinar
The only way of really knowing the strength of a crimped terminal is to pull it.
671
Case study
Torsion spring testing
Customised engineering example
Unlike most compression and tension springs, torsion springs are produced in a variety of forms with differing leg positions.
672
Accessory
CrimpTest-1 kN Calibration Bracket
432-671
The calibration bracket is designed for verifying the accuracy of the CrimpTest-1 kN loadcell readings. For the user, this ensures that a unit does not continue to be used with inaccurate readings across its range. The main bracket should be bolted to a…
673
Case study
Burulma yayı testi
Özel mühendislik örneği Çoğu sıkıştırma ve germe yaylarının aksine, burulma yayları farklı bacak pozisyonlarına sahip çeşitli formlarda üretilir.
674
Accessory
Wood Shear Test Jig, 25 kN, QC-20 or QC-32 fitting
Mec17
Wood Shear Tester DIN 52367, with torque-free shearing for wood samples according to ISO 6238, EN 392 and for glued laminated timber to BS 373. ASTM D143 version also available.
Connects to test stand and loadcell via QC 20mm or 32mm fixings. Please…
675
Case study
Card and paper crease line testing
Customised engineering example
A packaging production company needed to test the crease force of the ink-coated card used in their fully-enclosed cartons.