Search results
1026
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 175 mm, 5-16 UNC
432-352
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
1027
Accessory
1/2" upper chuck assembly for use on Helixa sensors (3 N.m & 6 N.m only)
432-617
A standard self-centering 3-jaw chuck with key.
It has a maximum ½" (12.7 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
1028
Accessory
Clevis Grip (small), 500 N, 10-32 UNF
432-403
Small Clevis Grip fitted with female 10-32 UNF thread and supplied with male grub-screw.
Used for securing odd-shaped parts for testing tensile forces below 500N.
1029
Accessory
Dial Gauge Bracket Set
432-167
The dial gauge bracket set allows an analogue or digital comparator to be securely fitted to the MDD manual test stand. Digital comparators are suitable for measuring crosshead movement over short distances.
1030
Accessory
Dovetail Bracket for AFG or BFG
432-427
The dovetail bracket is used for mounting the Advanced Force Gauge (AFG) and Basic Force Gauge (BFG) to test stands. It allows the operator to precisely align the gauge on the stand. Supplied with fixing screws.
Note: maximum load 2500 N
1031
Accessory
Self-levelling Compression Plate Steel - 96 mm, 50 kN, QC-32 fitting
MecS223g-96
MecS223g - 96mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1032
Accessory
Compression Plate, Hardened and Ground, 50 mm, M6
432-197
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
50mm diameter having M6 female thread.
1033
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1034
Accessory
Interlock override plug
PDV12034-01
Plug for use with software-controlled "-i" and "-xt" systems. It allows an interlocked guard to be used in non-interlock mode.
Helps when first setting up trial test programmes.
1035
Accessory
QC Type A Adapter, 20 mm M to 5-16 UNC F, c/w pin
432-282
Quick-Change Male Post to Thread Adapter
Fixes directly to the 5-16 UNC screw in anvil plate of test stands or to the 5-16 UNC extension rod connected to loadcells…
1036
Accessory
Adapter, 500 N, 10-32 UNF to 5-16 UNC, F to F
432-329
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1037
Accessory
Compression Plate, Hardened and Ground, 19 mm, 10-32 UNF
432-337
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
19mm diameter having 10-32 UNF female thread.
1038
Accessory
Dual Footswitches (non-locking type) for pneumatic grips
Mec205-1
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-1:
Non-locking dual footswitches open the jaws of the pneumatic grip by pressing the foot pedal…
1039
Accessory
Small Pneumatic Plane Grips - rubber-faced jaws, 200 N, Pair, QC-20 fitting
432-275
A pair of pneumatically-operated, single-action Small Pneumatic Plane Grips with an opening of 0-8mm.
Each 10mm x 10mm jaw is fitted with a rubber-faced surface. The specimen is held between the fixed jaw and the moving jaw, which clamps the specimen in…
1040
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1041
Accessory
20 kN Wedge Grip, QC-20 fitting
Mec243-20
MEC 243-20 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 20 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1042
Accessory
Self-levelling Compression Plate Steel - 56 mm, 25 kN, QC-20 fitting
MecS223k-56
MecS223k - 56mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1043
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 100 mm, 5-16 UNC
432-351
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
1044
Accessory
1/2" Lower Chuck Assembly for use on Helixa motor spindle
432-616
A standard self-centering 3-jaw chuck with key. It has a maximum ½ " (12.7 mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw. Used to secure a variety of test specimens for torque applications of 1…
1045
Accessory
Clevis Grip (Large), 2.5 kN, 5-16 UNC
432-400
Large Clevis Grip fitted with female 5-16 UNC thread and supplied with male grub-screw.
Used for testing heavy duty tension springs or for securing odd-shaped parts up to 2.5 kN capacity.
1046
Accessory
Film Grips, 500 N, 10-32 UNF
432-157
Used for flexible samples such as films, where conventional flat-faced grips may create stress points and so artificially reduce tensile strength. Samples are wrapped around the roller thereby spreading the load around the diameter.
Grips are supplied…
1047
Accessory
Flip Cap Accessory, 100 N, 10-32 UNF
432-419
The Flip Cap Accessory is designed to easily fit under flip caps to test their opening force.
It is fitted with a 10-32 UNF female thread and supplied with a male grub-screw for easy connection to a loadcell or force gauge.
1048
Accessory
Self-levelling Compression Plate Steel - 56 mm, 50 kN, QC-32 fitting
MecS223g-56
MecS223g - 56mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1049
Accessory
Adapter, 500N, 10-32 to M6
432-193
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
10-32 UNF male thread to M6 threaded hole
1050
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…