Search results
451
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
452
Accessory
LTE 700 mm long travel extensometer2
432-700
Long Travel Extensometers (LTE) are designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. They accurately measure strain directly from the test specimen to enable the most accurate calculation of the physical…
453
Accessory
U-form Pneumatic Vice Grip - Single Action, 5 kN, Pair, QC-20 fitting
Mec83
MEC 83 (body only) :
A pair of pneumatically-operated, Single-action U-form Vice Grips with a standard opening of 0-10mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manually-adjusted jaw holder + 1 pneumatic piston…
454
Accessory
3-Jaw Popper Pull-off Fixture, 500 N, 10-32 UNF
432-409
The 3-Jaw Popper Pull-Off Fixture is supplied fitted to a short chain link assembly having a 10-32 UNF female thread. It is used for to securely holding 13-15 ligne press-studs ('poppers') when carrying out pull-off "test-to-failure" tests.
Typically…
455
Accessory
3- & 4-point Bend Jig, 50 kN, Aluminium, QC-32 fitting
Mec22-360
MEC22 - A fully-configurable 50 kN Bend Jig in aluminium.
The main support beam has a bending span up to 330 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single upper anvil…
456
Accessory
Pull Peel Wheel Fixture, QC-20 fitting
432-265
The pull peel wheel fixture is designed for mounting to the base of a motorised test stand to test the peel strength of flexible adhesive-backed materials (eg. tapes).
Specimens are wound around the Pull Peel Wheel and the free end is clamped in a…
457
Accessory
Modified Large Wedge Grip, 1 kN, 5-16 UNC
432-212
The Modified Large Wedge Grip has a short body with long jaws to be able to securely hold S-spring press-studs ('poppers') when carrying out pull-off "test-to-failure" tests.
Typically used in conjunction with the 'Popper Cam Base' Textile Fixture (432-…
458
Accessory
Toggle Clamps, 50 mm, serrated, 500 N, 10-32 UNF
432-176
Toggle Clamp (serrated)
An adjustable jaw can be positioned to ensure that symmetrical or asymmetrical specimens are aligned centrally. The other jaw is fitted to a toggle mechanism operated by a lever to allow rapid, easy clamping of specimens for…
459
Accessory
U-Form Vice Grip - Double Action, 5 kN, 28 mm opening, QC-20 fitting
Mec240g
MEC 240g (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
460
Accessory
V-jaw vice clamp, three jaws with quick release lever, 500N, QC-20 fitting
432-677
432-677 is a vice fixture for mounting to the base of a test stand when performing tension and compression tests. It has three jaws, two vertically spaced on one side, clamping with a single jaw at mid-height. The double jaw is precisely adjusted with a…
461
Accessory
U-Form Vice Grip - Double Action, 5 kN, 28 mm opening, QC-20 fitting
Mec240g
MEC 240g (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
462
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
463
Accessory
Small Container Holder, 100 N, 10-78 mm
432-493
A versatile gripping fixture to hold containers when conducting low-force pull-off tests on closures and other fixings (eg. flip-cap lids).
4-pegs hold the container on an adjustable lead-screw and the knob secures the container tightly in place.…
464
Accessory
Eccentric Roller Grip - Pyramid (serrated) roller, 10 kN, QC-20 fitting
Mec7-10
MEC7-10 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 60mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
465
Accessory
3- & 4-point Bend Jig, 2.5 kN, Aluminium, QC-20 fitting
Mec238
MEC238 - A small yet fully-configurable 2.5 kN Bend Jig in aluminium.
The main support beam has a bending span up to 150 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single…
466
Accessory
Eccentric Roller Grip - Smooth roller against rubber base, 1 kN, QC-20 fitting
Mec7-1-SR
MEC7-1-SR Eccentric Cam Grip
Fitted with a smooth-faced 50mm wide roller cam and a rubber-coating on the contact face of the grip body. As a load is applied to a specimen the cam self-tightens, spreading the load evenly. Used for specimens where a…
467
Accessory
Eccentric Roller Grip - Smooth roller against rubber base, 1 kN, QC-20 fitting
Mec7-1-SR
MEC7-1-SR Eccentric Cam Grip
Fitted with a smooth-faced 50mm wide roller cam and a rubber-coating on the contact face of the grip body. As a load is applied to a specimen the cam self-tightens, spreading the load evenly. Used for specimens where a…
468
Accessory
Coefficient of Friction Fixture (ASTM D1894), 10-32 UNF
432-144
Designed to measure the coefficient of friction (COF) to ASTM D1894, between two pieces of material.
The COF test determines the kinetic and static resistance of one surface being dragged across another.
This friction table can be mounted to the base…
469
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
470
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
471
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…
472
Accessory
38 mm Crosshead extension only
432-508
The dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or to fit deeper grips without hitting the column.
Load rating of the test stand is…
473
Accessory
Container Holder, 100 N, 10-190 mm
432-411
A versatile gripping fixture to hold containers when conducting low-force pull-off tests on closures and other fixings (eg. flip-cap lids).
4-pegs hold the container on an adjustable lead-screw and the knob secures the container tightly in place.…
474
Accessory
Upper Key-operated Chuck, square drive, for use with Vortex sensors
432-444
Upper ‘key-operated’ 4-jaw Chuck (small)
Fitted with a square-drive adapter for connection to 'Vortex' torque sensors. Supplied with dedicated chuck-key and 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected.
Used for…
475
Accessory
16 mm Crosshead Extension
432-307
The 16mm dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or deeper grips.
Load rating of test stand is reduced by 25%.