Mecmesin | Search results

876

^{[Page extract]}

Baumann tear test

- slit cut laterally in the centre of sample; used to test the tear strength of leather

877

^{[Page extract]}

Shear testing is a very popular and valuable test method applicable to food texture analysis. This method applies slicing or 'shearing' to the product, which replicates the action of the front incisors when food is introduced into the mouth.

878

^{[Page extract]}

texture, compression

Compression is one of the most common texture tests, especially for food products. Typically a sample is placed on a flat surface and an upper compression platen is lowered into the sample.

879

^{[Page extract]}

Compressive burst

The integrity of a fluid or gas-filled container can be tested in terms of its propensity to burst. This may involve a failure in the material by splitting, or perhaps a seal/seam gives way or even the closure can break loose.

880

^{[Page extract]}

T-peel

T-peel test procedures are commonly used to measure peel strength for flexible laminates.In this test, the entire load applied is transmitted to the bond. This type of peel thus tends to provide the lowest values of any peel test

881

^{[Page extract]}

puncture resistance

Puncture resistance is a function of controlled stretch and tear at a point.

882

^{[Page extract]}

Government

The general government sector covers institutions and public bodies where regulations and standards must be strictly adhered to.

883

Article/Campaign

Mecmesin pioneers the world’s ultimate digital force gauge

Ground-breaking VFG touchscreen force gauge

884

Accessory

Pin Chuck, 100 N, 10-32 UNF

432-382

Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm. For tension and compression testing below 100N. Fitted with adaptor having 10-32 UNF female threaded hole & 10-32 UNF grub-screw

885

Accessory

Compression Plate, Hardened and Ground, 50 mm, 10-32 UNF

432-172 F95

Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs. 50mm diameter having 10-32 UNF female thread.

886

Accessory

Compression Plate, Rubber-Faced, 50 mm, 5-16 UNC

432-219

50mm nickel-plated compression plate featuring a rubber layer, which helps to prevent damage from metal-to-metal contact during a compression test. Fitted with 5-16 UNC female thread. Nickel-plated compression plates are resistant to rusting.

887

Accessory

Spring-loaded Pinch Grip with Chain Link, 20 N, QC-20 fitting

MecS205k

A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample. The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens. Fitted with a flexible chain…

888

Accessory

Adapter, 5 kN, 5-16 UNC to 5-16 UNC, F to F

432-293

Female-to-female Adapter Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.

889

Accessory

Adapter, 5 kN, 5-16 UNC to M12, M to F

432-332

Male-to-female Adapter Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.

890

Accessory

Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table

PSV15030

A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards. For use with the FINAT 2 Assisted Peel Table - part number…

891

Accessory

Compression Plate, Nickel-plated, Vented by Slots & Flat, 50 mm, 10-32 UNF

432-346

Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles. Slots in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…

892

Accessory

Self-levelling Compression Plate Steel - 196 mm, 25 kN, QC-20 fitting

MecS223k-196

MecS223k - 196mm diameter: Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample. The MecS223 range of hardened steel…

893

Accessory

Scissor Grip, 20 kN, QC-20 or QC-32 fitting

Mec11-20

MEC11-20 (Body only) : Scissor-action grip rated to 20 kN fitted with either QC-20 or QC-32 connection. Locking function allows the grip to remain open when inserting a specimen. Spring tension provides enough clamping force to prevent the specimen…

894

Accessory

Spring-loaded Pinch Grip with Chain Link, 20 N, QC-20 fitting

MecS205k

895

Accessory

Custom-made Safety Guards and Enclosures

PDVguard

Where the standard safety guard does not fulfil your application requirements, Mecmesin can work with you to design and produce a custom-made safety guard to meet your exact requirements. Suitable for any Mecmesin test stand. Previously-designed guards…

896

Accessory

Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting

Mec240k-S30

MEC 240k-S30 (body only) : A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place. Rated to 1 kN in…

897

Accessory

Compression Plate, Nickel-plated, Vented by Holes & Cone, 50 mm, 10-32 UNF

432-347

Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles. Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…

898

Accessory

Lever-operated Cam Grip (small serrated), 500 N, 10-32 UNF

432-383

The small Lever-operated Cam Grip is designed with a plated 30mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also allows for quick insertion and release of samples. Fitted with a 10-32 UNF female…

899

Accessory

Large Single-action Vice Grip, rubber-faced, 2 kN, QC-20 fitting

432-267-V01

A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place. Rated to 2 kN in tension with rubber-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides excellent…

900

Accessory

Scissor Grip, 5 kN, QC-20 fitting

Mec11-5

MEC11-5 Scissor-action grip (Body only) : Rated to 5 kN fitted with QC-20 connection. Spring tension provides enough clamping force to prevent the specimen from slipping when initially inserted. The rated tensile force changes according to the opening…