Compressive shear | Mecmesin

Compressive shear testing is simply the pushing apart of a material specimen by applying compressive force from opposite sides in a parallel plane. In this way, the material is stressed in a sliding motion.

Typically it is used to test adhesive bonds and layered composites where it is the compressive equivalent of a 'tensile lap shear test'.

It is also used as a test method to determine the internal strength of a material that is designed to bear shear forces.

A compressive shear test may be single-shear, where one part is pushed down across another. Alternatively, it can be double-shear, where a bonded section is pushed out from between the sections on either side.

Some of our customers

<iframe class="sproutvideo-player" src="https://videos.sproutvideo.com/embed/a49ddab81b13edcb2c/03cd36940bec182c?playerTheme=dark&playerColor=fdc732" width="630" height="630" frameborder="0" allowfullscreen=""></iframe>

Featured case studies

PCB pull-off and shear test fixture various views

PCB pull and shear test

Standards

Featured or equivalent test standards for Mecmesin solutions in this section

ASTM C297

Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

ASTM C393

Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

ASTM D6862-11

Standard Test Method for 90 Degree Peel Resistance of Adhesives

BS EN 12090

Thermal insulating products for building applications. Determination of shear behaviour

BS EN 12430

Thermal insulating products for building applications. Determination of behaviour under point load

BS EN 1607

Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces

BS EN 1608

Thermal insulating products for building applications. Determination of tensile strength parallel to faces

EN 12089

Thermal insulating products for building applications. Determination of bending behaviour

EN 826

Thermal insulating products for building applications - determination of compression behaviour

IEC 62137-1-1

Surface mounting technology - Part 1-1: Pull strength test of solder joint

다이아몬드 절삭 공구 이빨 파손 저항 테스트

Case study

다이아몬드 에지 연삭 및 절삭 공구 파손 강도

PDV14173 토양 전단 고정구 구성 요소

Custom-fit

느슨한 건축 자재의 전단 강도 측정

PCB solder joint test close up and schematic of the custom fixture

Case study

PCB Solder Joint Shear

PCB pull-off and shear test fixture various views

Case study

PCB pull and shear test

맞춤형 고정 장치를 사용한 립스틱 파손 테스트

Case study

립스틱 총알 파손 저항 테스트

Further test types

lap shear under compression