Search results
576
Event
Tensile Testing for Wiring Harness Connections Webinar
The only way of really knowing the strength of a crimped terminal is to pull it.
577
Accessory
Wood Shear Test Jig, 25 kN, QC-20 or QC-32 fitting
Mec17
Wood Shear Tester DIN 52367, with torque-free shearing for wood samples according to ISO 6238, EN 392 and for glued laminated timber to BS 373. ASTM D143 version also available.
Connects to test stand and loadcell via QC 20mm or 32mm fixings. Please…
578
Case study
Test igienico di chiusura del contenitore
Esempio di ingegneria personalizzato Un produttore di contenitori per lo smaltimento igienico ci è venuto incontro con un'unità di smaltimento pannolini (pannolini) dotata di un meccanismo di aspirazione rotante.
579
Case study
Measuring shear strength of loose building materials
Customised engineering example
The shear strength of compacted materials (e.g. soil and sand) can be awkward to test.
580
Case study
Tester della forza di sbattimento della porta scorrevole del treno
Requisiti È stato specificato un dispositivo portatile per testare la forza richiesta per attivare il dispositivo di sicurezza integrato quando le porte automatiche si chiudono sui treni.
581
Case study
Cable duct strength testing
Customised engineering example
Our customer manufactures tubes and ducts for routing of cables and optical fibres. Installation of these uses blowing, pushing and pulling techniques.
582
Case study
Test dei dispositivi medici
Requisiti Fornire una macchina di prova di trazione flessibile a basso costo che potrebbe essere utilizzata in combinazione con fissaggi speciali, per eseguire una serie di test funzionali e distruttivi su una gamma di prodotti.
583
Product
Tester di impatto di freccette che cadono
Gamma MEC-FD
MEC-FD1
La gamma Mecmesin MEC-FD Dart Impact Dart Impact è progettata per misurare la resistenza agli urti o la tenacità dei film plastici in conformità con i metodi A e B a caduta libera ASTM D1709 e ISO 7765-1 . Sono inclusi accessori per freccette e pesi…
584
Accessory
FINAT 1 Peel Jig for 180 degree testing, QC-20
PDV13016-C
FINAT 1 Peel Jig - 180°
A polished steel plate used for affixing pressure-sensitive adhesive tape in accordance with FINAT 1 test method and other international standards.
Fitted with an adaptor having QC-20mm female hole for connection to the base of…
586
Event
Tensile Testing for Wiring Harness Connections
The only way of really knowing the strength of a crimped terminal is to pull it. This can reveal production problems, where strand nicks, incorrect crimp height, or effects from changes in terminal supply, may not be clearly apparent.
587
Case study
Test di coppia degli occhiali regolabile
Esempio di ingegneria personalizzato Adlens produce lenti per occhiali adattive, in cui la potenza ottica viene regolata da un quadrante laterale che viene quindi rimosso.
589
Event
Medical Devices: Torque testing of Child Resistant Closures (CRC) with 21 CFR Part 11 compliance
Torque testing of Child Resistant Closures (CRC) with 21 CFR Part 11 compliance
591
Case study
Peel test di imballaggi semirigidi per dispositivi medici
Esempio di ingegneria personalizzato Il nostro cliente doveva testare la qualità del peeling di un coperchio in carta Tyvek® usato per sigillare un vassoio di plastica termoformato sterile, semirigido contenente siringhe preriempite.
592
Case study
Prove di deformazione dello specchio esterno per autoveicoli
Requisiti Murakami Ampas (Tailandia) è un importante fornitore di sistemi di specchi per l'industria automobilistica.
593
Case study
Tester di tiro magnetico
Requisiti I separatori magnetici intrappolano e rimuovono i corpi estranei ferromagnetici dai flussi di prodotti, al fine di garantire un'elevata qualità del prodotto e prevenire danni a macchinari e apparecchiature di elaborazione.
594
Accessory
Pull Peel Wheel Fixture, QC-20 fitting
432-265
The pull peel wheel fixture is designed for mounting to the base of a motorised test stand to test the peel strength of flexible adhesive-backed materials (eg. tapes).
Specimens are wound around the Pull Peel Wheel and the free end is clamped in a…
595
Accessory
3- & 4-point Bend Jig, 2.5 kN, Aluminium, QC-20 fitting
Mec238
MEC238 - A small yet fully-configurable 2.5 kN Bend Jig in aluminium.
The main support beam has a bending span up to 150 mm and can bear a wide selection of interchangeable single-roller or dual-roller anvils to suit your specimen material.
A single…
596
Accessory
Eccentric Roller Grip - Smooth roller against rubber base, 1 kN, QC-20 fitting
Mec7-1-SR
MEC7-1-SR Eccentric Cam Grip
Fitted with a smooth-faced 50mm wide roller cam and a rubber-coating on the contact face of the grip body. As a load is applied to a specimen the cam self-tightens, spreading the load evenly. Used for specimens where a…
597
Accessory
Modified Large Wedge Grip, 1 kN, 5-16 UNC
432-212
The Modified Large Wedge Grip has a short body with long jaws to be able to securely hold S-spring press-studs ('poppers') when carrying out pull-off "test-to-failure" tests.
Typically used in conjunction with the 'Popper Cam Base' Textile Fixture (432-…
598
Accessory
Toggle Clamps, 50 mm, serrated, 500 N, 10-32 UNF
432-176
Toggle Clamp (serrated)
An adjustable jaw can be positioned to ensure that symmetrical or asymmetrical specimens are aligned centrally. The other jaw is fitted to a toggle mechanism operated by a lever to allow rapid, easy clamping of specimens for…
599
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
600
Accessory
Eccentric Roller Grip - pyramid (serrated) roller, 1 kN, QC-20 fitting
Mec7-1
MEC7-1 Eccentric Cam Grip
Fitted with a pyramid-faced serrated 50mm wide roller cam. As a load is applied to a specimen the cam self-tightens , spreading the load evenly.
The lever allows for quick insertion and release of specimen to reduce testing…