Search results
1251
Accessory
QC Type A Adapter, 20 mm M to 5-16 UNC F, c/w pin
432-282
Quick-Change Male Post to Thread Adapter
Fixes directly to the 5-16 UNC screw in anvil plate of test stands or to the 5-16 UNC extension rod connected to loadcells…
1252
Accessory
Small Pneumatic Plane Grips - rubber-faced jaws, 200 N, Pair, QC-20 fitting
432-275
A pair of pneumatically-operated, single-action Small Pneumatic Plane Grips with an opening of 0-8mm.
Each 10mm x 10mm jaw is fitted with a rubber-faced surface. The specimen is held between the fixed jaw and the moving jaw, which clamps the specimen in…
1253
Accessory
Adapter, 500 N, 10-32 UNF to 5-16 UNC, F to F
432-329
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1254
Accessory
Radiused Probe - 8 mm, 500 N, 10-32 UNF
432-354
Radiused Probes are used to perform penetration or puncture tests on a wide range of products.
Aspects measured include firmness and ripeness of cosmetics, medical gels and foodstuffs.
6mm diameter at the tip rising to 8mm outer diameter of the probe.…
1255
Accessory
Compression Plate, Hardened and Ground, 19 mm, 10-32 UNF
432-337
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
19mm diameter having 10-32 UNF female thread.
1256
Accessory
1/2" Lower Chuck Assembly for use on Helixa motor spindle
432-616
A standard self-centering 3-jaw chuck with key. It has a maximum ½ " (12.7 mm) opening and is connected to the Helixa motor-drive spindle via an adaptor with quick-release grub-screw. Used to secure a variety of test specimens for torque applications of 1…
1257
Accessory
Self-levelling Compression Plate Steel - 56 mm, 50 kN, QC-32 fitting
MecS223g-56
MecS223g - 56mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1258
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 100 mm, 5-16 UNC
432-351
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
1259
Accessory
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
1260
Accessory
Clevis Grip (Large), 2.5 kN, 5-16 UNC
432-400
Large Clevis Grip fitted with female 5-16 UNC thread and supplied with male grub-screw.
Used for testing heavy duty tension springs or for securing odd-shaped parts up to 2.5 kN capacity.
1261
Accessory
Lightweight Vice Grip - Double Action, 100 N, Opening 0-46mm, 10-32 UNF
Mec227-S46
MEC 227-S46 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 100 N in tension with…
1262
Accessory
Flip Cap Accessory, 100 N, 10-32 UNF
432-419
The Flip Cap Accessory is designed to easily fit under flip caps to test their opening force.
It is fitted with a 10-32 UNF female thread and supplied with a male grub-screw for easy connection to a loadcell or force gauge.
1263
Accessory
Film Grips, 500 N, 10-32 UNF
432-157
Used for flexible samples such as films, where conventional flat-faced grips may create stress points and so artificially reduce tensile strength. Samples are wrapped around the roller thereby spreading the load around the diameter.
Grips are supplied…
1264
Accessory
Self-levelling Compression Plate Steel - 156 mm, 25 kN, QC-20 fitting
MecS223k-156
MecS223k - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1265
Accessory
Adapter, 500N, 10-32 to M6
432-193
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
10-32 UNF male thread to M6 threaded hole
1266
Accessory
Spring-Loaded Fold Grip, 2 kN, QC-20 fitting
432-262
Fitted with a 45mm wide roller cam having a cross-hatch knurled surface. The roller closes onto a serrated contact face of the grip body.
The specimen is folded around the knurled roller to give maximum contact area. As a load is applied to the…
1267
Accessory
Adapter, 500 N, 10-32 UNF to 10-32 UNF, F to F
432-328
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1268
Accessory
Compression Plate, Hardened and Ground,12 mm, 10-32 UNF
432-336
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
12mm diameter having 10-32 UNF female thread.
1269
Accessory
Heavy-duty Pneumatic Plane Grips - pyramid-faced jaws, 5 kN, Pair, QC-20 fitting
432-374
A pair of pneumatically-operated, single-action Heavy-duty Pneumatic Plane Grips with an opening of 0-12 mm.
Each 40mm high x 76mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and…
1270
Accessory
3/8" Upper Chuck Assembly for use on Helixa sensors
432-615
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
Used to secure a variety of test specimens for torque applications of 1.5 - 10…
1271
Accessory
Self-levelling Compression Plate Steel - 196 mm, 50 kN, QC-32 fitting
MecS223g-196
MecS223g - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1272
Accessory
Dual Footswitches (locking type) for pneumatic grips
Mec205-2
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec 205-2:
Locking dual footswitches open the jaws of the grip by pressing the foot pedal and remain…
1273
Accessory
Lightweight Vice Grip - Double Action, 100 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 100 N in tension with an…
1274
Accessory
QC Type J, lightweight adapter, Ø 20 mm M to 10-32 UNF F c/w pin
432-418
Quick-Change Male Post to Thread Adapter (lightweight)
Fixes directly to the 10-32 UNF screw in anvil plate of test stands or to the 10-32 UNF extension rod connected to loadcells…
1275
Accessory
Medium Vice Grip - Single Action, 1 kN, 52 mm opening, QC-20 fitting
Mec240k-S50
MEC 240k-S50 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manualy set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1…