Search results
1001
Accesorio
Orbis and Tornado Mk II/Vortex torque cell accuracy check rig
432-621
This bench-top unit enables the on-site verification of the calibration status of Orbis MkII, Tornado MkII testers, and static torque sensors rated from 1.5 N.m to 10 N.m. Using dead-weight masses, the kit allows you to quickly decide whether or not…
1002
Accesorio
Needle Probe, stainless steel, 2 mm
432-087
The 2mm diameter needle probe is made from stainless steel and has an M3 female thread. It is designed for surface puncture and penetration tests.
Commonly used with extension rod M3 male to 10-32 UNF female ... part number 432-100
1003
Accesorio
Self-levelling Compression Plate Steel - 156 mm, 25 kN, QC-20 fitting
MecS223k-156
MecS223k - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1004
Accesorio
TS torque screwdriver chuck, 3/8"
432-233
A standard self-centering 3-jaw chuck with key.
It has a maximum ⅜" (10mm) opening and is connected to the ‘TS’ screwdriver via a square drive spindle. Used to secure a variety of test specimens for torque applications of 1.5 - 10 N.m
1005
Accesorio
Scissor Grip, 20 kN, QC-20 or QC-32 fitting
Mec11-20
MEC11-20 (Body only) :
Scissor-action grip rated to 20 kN fitted with either QC-20 or QC-32 connection.
Locking function allows the grip to remain open when inserting a specimen.
Spring tension provides enough clamping force to prevent the specimen…
1006
Accesorio
Adapter, 500N, M6 to M6, F to F
432-334
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1007
Accesorio
Dual Handswitches (locking type) for pneumatic grips
Mec205-3
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec205-3:
Locking dual handswitches open the jaws of the grip by pushing the lever and remain open after…
1008
Accesorio
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
1009
Accesorio
Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting
Mec240k-S30
MEC 240k-S30 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1 kN in…
1010
Accesorio
Large Single-action Vice Grip, pyramid-faced, 2 kN, QC-20 fitting
432-267
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with pyramid-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides…
1011
Accesorio
Adapter, 500N, 10-32 UNF to M6, F to F
432-417
Female-to-female Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1012
Accesorio
Inverted Chisel Point - Ø 8 mm, 500 N, 10-32 UNF
432-356
For compression testing of cylindrical or wire specimens up to 500 N.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 10-32 UNF female thread for connection to loadcell
1013
Accesorio
Miniature Vice Grip, 100 N, QC-20 fitting
MecS341
Versatile, easy to use, and suitable for small components (eg bonded joints) where access is limited and tensile forces are below 100 N.
Clamping surfaces are machined with pyramid-shaped serrations to ensure optimum gripping force.
The flexible chain-…
1014
Accesorio
90-degree Peel Jig for FPT-H1
432-620
This 90-degree Peel Jig fits to the FPT-H1 for 90 degree peel testing of pressure sensitive tapes and labels in accordance with international standards.
FINAT FTM2, ASTM D330. PSTC 101 Method F.
It accepts interchangeable float glass and stainless steel…
1015
Accesorio
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
1016
Accesorio
Self-levelling Compression Plate Steel - 116 mm, 25 kN, QC-20 fitting
MecS223k-116
MecS223k - 116mm diameter Self-levelling Compression Plate:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The…
1017
Accesorio
Mounting Plate for CFG+ Compact Force Gauge
432-131
Allows a CFG+ Compact Force Gauge to be mounted onto the crosshead of a test stand. Fixing screws included.
1018
Accesorio
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…
1019
Accesorio
Compression Plate, Rubber-Faced, 50 mm, 10-32 UNF
432-220
50mm nickel-plated compression plate featuring a rubber layer, which helps to prevent damage from metal-to-metal contact during a compression test. Fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
1021
Accesorio
Adapter, 5 kN, 5-16 UNC to M10, M to M
432-333
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1022
Accesorio
Dual Footswitches (locking type) for pneumatic grips
Mec205-2
Pneumatic grips are the ideal choice when performing tensile tests on sensitive materials that have a tendency to slip or break at point of clamping.
Mec 205-2:
Locking dual footswitches open the jaws of the grip by pressing the foot pedal and remain…
1023
Accesorio
Compression Plate, Vented by Holes & Cone, 50 mm, 5-16 UNC
432-348
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1024
Accesorio
Cable Cam Grip (small), serrated, 1 kN, 10-32 UNF
432-390
Cable Cam Grip - serrated, small
Designed for holding insulated cables and wire. The sample is secured by the cam, which self-tightens as a load is applied and spreads the load evenly.
Serrated cams are preferred for materials which may be slippy and…
1025
Accesorio
50 kN Wedge Grip, QC-32 fitting
Mec243-50
MEC 243-50 Wedge Grip (body only):
A multipurpose self-tightening Wedge Grip with a lever arm for rapidly securing and releasing the specimen when testing.
Rated to 50 kN in tension with an opening of 0-16mm depending on the jaw types selected (sold…