Search results
1351
Accessory
Compression Plate, Rubber-Faced, 50 mm, 10-32 UNF
432-220
50mm nickel-plated compression plate featuring a rubber layer, which helps to prevent damage from metal-to-metal contact during a compression test. Fitted with 10-32 UNF female thread. Nickel-plated compression plates are resistant to rusting.
1352
Accessory
PSV12129 Split mandrel cork grip
PSV12129
A Split Mandrel Grip comprising an outer body with lead-screw and handles. Used for adjustable positioning of half-round jaws having wire-eroded serrated faces.
Designed specifically to grip natural corks of 26-32 mm diameter when testing the release…
1353
Accessory
Self-levelling Compression Plate Steel - 156 mm, 50 kN, QC-32 fitting
MecS223g-156
MecS223g - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1354
Accessory
Adapter, 5 kN, 5-16 UNC to M10, M to M
432-333
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1355
Accessory
Druckknopf-Nockenspannzeug, 1 kN, 10-32 UNF
432-179
Das Nockenspannzeug für Druckknöpfe wird verwendet, um die Festigkeit von Druckknöpfen und Zapfen auf Kleidungen für Kinder zu testen.
Die Nockensockel wird an der Grundplatte des Prüfstands mit einen 10-32 UNF Schraube befestigt und der Druckknopf wird…
1356
Accessory
Compression Plate, Nickel-plated, Vented by Holes & Cone, 50 mm, 10-32 UNF
432-347
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Holes in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1357
Accessory
Belüftete Druckplatte, Nasenkegel, 50 mm, 5-16 UNC
432-348
Belüftete Druckplatten sind für Anpresskraft-Tests bzw Stauchversuche mit Behältern wie zum Beispiel PET-Flaschen geeignet.
Die Löcher in der Druckplatte ermöglichen den Luftdurchlass, damit das Drücken der internen Luft in der Flasche die Messungen…
1358
Accessory
standard T-slot fixture table
432-243
This standard fixture table is used for easy configuration and alignment of test fixtures. Fits to a T-slot anvil.
1359
Accessory
Lever-operated Cam Grip (small serrated), 500 N, 10-32 UNF
432-383
The small Lever-operated Cam Grip is designed with a plated 30mm wide roller cam to self-tighten as a load is applied to a sample, spreading the load evenly. The lever also allows for quick insertion and release of samples.
Fitted with a 10-32 UNF female…
1360
Accessory
Self-levelling Compression Plate Steel - 196 mm, 25 kN, QC-20 fitting
MecS223k-196
MecS223k - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1361
Accessory
Schnappdeckel-Zubehörteil, 100 N, 10-32 UNF
432-419
Dieses Zubehörteil lässt sich einfach unter Schnappdeckeln montieren, wenn die Öffnungskraft dieser Schnappdeckel getestet wird.
Ausgestattet mit Innengewinde 10-32 UNF zum Anschluss auf einer Lastzelle.
1362
Accessory
Large Single-action Vice Grip, wave-form, 2 kN, QC-20 fitting
432-267-V02
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with wave-form jaws of 78mm wide x 28mm high having an opening of 0 - 6.5 mm. Provides…
1363
Accessory
Lightweight Mini Vice Grip, 5 N, M6
432-281
By virtue of its spring loaded clamping action the Lightweight Mini Vice Grip is ideal for testing ultra low forces.
Weighing only 30 g it holds specimens without the need to tighten jaws by a thread, which may damage low-capacity loadcells or even the…
1364
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
1365
Accessory
Scherenspannzeug, 5 kN, Schnellwechsel-Befestigung QC-20
Mec11-5
MEC11-5 Scherenspannzeug (Körper ohne Backen)
Selbstspannende und selbstausrichtende Spannzeug für Scherprüfungen bis 5 kN.
Mit Schnellwechsel-Befestigung QC-20.
Die Proben werden durch Federvorspannung gehalten. Das Verhältnis Spannkraft zur Zugkraft…
1366
Accessory
Pneumatische einfache Schraubspannköpfe mit einseitigen Kolben, 1 kN, Öffnungsweite 0-20mm, Paar, Schnellwechsel-Befestigung QC-20
Mec240k-S20+Ko
MEC 240k-S20 + kO (nur Korpus)
Ein Paar Luftdruckbetriebener einfache Schraubspannköpfe mit einem einseitigen Pneumatikkolben von Durchmesser 50 mm + einem manuellen Backenhalter.
Max. Spannkraft 1 kN mit einer Öffnungsweite von 0-20 mm, je nach Art der…
1367
Accessory
Padded Radiused Probe, 500 N, 5-16 UNC
432-414
The Padded Radiused Probe is used with a short extension rod to connect to a digital force gauge to measure tension and compression.
It has a thin layer of rubber and is specially designed for use in manual handling and ergonomic assessment applications…
1368
Software
Vector OS (VFG/VFTI)
Vector OS
Our touchscreen instruments are powered by Vector OS, Mecmesin's technology platform for its latest force and torque test equipment. It delivers intuitive and customisable user interfaces, as well as advanced data acquisition and analysis.
To…
1369
Accessory
Coefficient of Friction Fixture (ISO 8295)
432-501
Designed to measure the coefficient of friction (COF) to ISO 8295 between two pieces of material. The COF test determines the kinetic and static resistance of one surface being dragged across another. This friction table can be precisely leveled.
1370
Accessory
Scissor Grip, 50 kN, QC-32 fitting
Mec11-50
MEC11-50 (Body only) :
Scissor-action grip rated to 50 kN fitted with QC-32 connection. Locking function allows grip to remain open when inserting specimen.
Spring tension provides enough clamping force to prevent the specimen from slipping when…
1371
Accessory
Satz von 4 Spannzapfen - 100mm lang
432-250
Ein Satz von 4 Spannzapfen (100mm lang), die höhere Probestücke für den Testverlauf senkrecht ausrichtet.
Die Spannzapfenhaben eine weiche Gummihülse, um höhere Proben während der Drehmomentprüfung festzuklemmen und über der gesamten Probenhöhe zu halten…
1372
Accessory
Lightweight Vice Grip - Double Action, 250 N, Opening 0-8mm, 10-32 UNF
Mec227
MEC 227 (body only):
A Lightweight Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
Rated to 250 N in tension with an…
1373
Accessory
Cone Probe, perspex, 45 degrees, M3
432-081
A perspex conical probe with 45° angle. Cone penetrometry is traditionally used within cosmetics and food products to assess hardness and spreadability. Also applicable for testing biscuits and other similar brittle products. Commonly used with extension…
1374
Accessory
Fadenspannzeug, 250 N, 10-32 UNF
432-363
Unsere Spannvorrichtungen für Drähte/Faden sind mit einem geschlitzen, formschlüssigen Zubehörteil und einer präzisionsbearbeiteten Drehplatte ausgestattet, um einen zentralen Bruch zu gewährleisten sowie die Ausrichtung der Probe sicherzustellen wenn…
1375
Accessory
Mounting Plate for CFG+ Compact Force Gauge
432-131
Allows a CFG+ Compact Force Gauge to be mounted onto the crosshead of a test stand. Fixing screws included.