Online demonstrations and training available from Mecmesin technical sales engineers


Online Prüfgeräte Vorführungen

 

Da immer mehr Menschen von zu Hause aus arbeiten, führen unsere technischen Verkaufsingenieure gerne Vorführungen und Schulungen über einen webbasierenden Videoanruf durch.

Bitte senden Sie uns, wenn möglich Muster zu, sodass unser Verkaufsteam in der Lage ist Ihnen die Tests an Ihren eigenen Produkten vorzuführen.

Bitte kontaktieren Sie uns, damit wir Ihre Anforderungen besprechen können und einen Vorführtermin oder eine Schulung vereinbaren können.

 

Torque Sensors (ETS)

ETS torque sensors

The Enhanced Torque Sensors (ETS) range of interchangeable torque sensors is specially adapted to the HelixaPro and VortexPro test systems.

They plug into the frame of the precision torque tester and their calibration characteristics are immediately recognised by the software without any input from the operator.

To ensure that you have the optimum selection to meet all your torque testing needs, eight different sensors are available. All sensors measure from zero and cover the range from 0.1 N.m right up to 10 N.m .

A range of grips, fixing tables and chucks is available to hold your specimens. Connection to each ETS sensor is via a ⅜" male square drive (ETS 0.3 - 10) or via a ¼" female hexagonal drive (ETS 0.1 - 0.2)

 

Sensor capacity, range and accuracy

Each sensor reads from zero to its full nominal capacity (listed below). Measurement accuracy is an outstanding ±0.5% of the sensor capacity.

Model ETS 0.1* 0.2* 0.3 1 1.5 3 6 10**
N.m 0.1 0.2 0.3 1 1.5 3 6 10
kgf.cm 1 2 3 10 15 30 60 100
lbf.in 0.9 1.8 2.7 9 13 26 50 90

*Not recommended for VortexPro
**Not recommended for HelixaPro

Mecmesin issued sensor and device calibration certificates

Each sensor is delivered as standard with its own calibration certificate traceable to national standards.
 

Servicing and calibration

Mecmesin service - mobile and at home

Mecmesin also provides annual servicing and torque sensor re-calibration. Talk to one of our engineers or your local national distributor to find out more.

Ask about servicing

 

Enhanced Torque Sensor (ETS) close-up on machine with auto injector pen fixture

ETS 0.1 - 0.2

ETS torque sensor - 0.1 N.m for high-precision at very low torque applications

Recommended for HelixaPro only. Fitted with a ¼" female hexagonal drive for connection to grips and test fixtures.

ETS 0.3 - 10

Example of ETS sensor for HelixaPro and VortexPro

Interchangeable torque sensors for the HelixaPro and VortexPro. Fitted with a ⅜" male square drive for connection to grips and test fixtures.

ETS 15 - 30

Example of ETS sensor for customised VortexPro test system (up to 30 N.m)

For custom applications requiring torque measurement up to 30 N.m, the VortexPro test frame and sensor capacity can be customised to meet your test requirements.